Page 11 / 110
Scroll up to view Page 6 - 10
- 11 -
2
H
ARDWARE
I
NSTALLATION
Networking Application
The following diagram explains the application of your print server.
Downloaded from
www.Manualslib.com
manuals search engine
Page 12 / 110
- 12 -
Installing the Print Server
Follow these steps for a trouble-free start of print server operations
with your Wireless Print Server.
1.
Confirm proper operation of the printer to be connected to the print
server.
2.
When you have confirmed proper operation of the printer, turn off
the power.
3.
Confirm that your network is operating normally.
4.
Connect the print server to the network (through the RJ-45
connector of the print server).
5.
While the printer is powered off, connect the print server to the
printer’s USB or Parallel port.
6.
Turn on the printer’s power.
7.
Connect the DC end of the AC Power adapter to the DC power
input socket of the print server and the AC end to the wall outlet.
This will supply power to the print server immediately.
NOTE:
This print server is built with a default IP Address.
To
prevent from any conflict in your network, it is recommended to use
the PS-Utility program to change the IP setting when there is some
other device’s IP Address is the same as the print server’s default
IP Address.
Downloaded from
www.Manualslib.com
manuals search engine
Page 13 / 110
- 13 -
3
U
SING
T
HE
U
TILITIES
This chapter describes the software utilities for the print server,
including how to set up your print server with these utility.
The
PS-
Utility
and
PS Wizard
are designed with a user-friendly interface that
allows you to set up and administer the print server easily.
Auto-Run Installation
Insert the Installation CD-ROM into your computer’s CD-ROM drive
to initiate the Auto-Run program, and the menu screen will appear as
below.
Downloaded from
www.Manualslib.com
manuals search engine
Page 14 / 110
- 14 -
•
PS Wizard
– click to setup printer port connectivity
•
Utility
– click to install PS-Utility.
Please refer to the next
section for detailed information on installing the utility.
•
User's Guide
– click to preview the
User's Guide
in PDF format
for detailed information of the Print Server.
•
Product Registration
– click to register your product on-line
•
Exit
– click to close the Auto-Run program.
Downloaded from
www.Manualslib.com
manuals search engine
Page 15 / 110
- 15 -
PS-Utility
To avoid the conflict in your network, you can use PS-Utility to
change the related settings of your print server (such as the IP address)
after finishing the installation.
Installing PS-Utility
1.
Click
Utility
Æ
PS Utility
from the Auto-Run menu screen.
Once executed, the Setup program will extract files to launch the
InstallShield Wizard; then, click
Next >
in the welcome screen of
InstallShield Wizard.
2.
Choose the destination location.
If no specific requirement,
leave the default setting and click
Next >
.
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live