TRENDnet TEW-823DRU Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

TRENDnet

TEW-823DRU

Page 11 / 64 Scroll up to view Page 6 - 10

TRENDnet User’s Guide

TEW-823DRU

Connect additional wired devices to your network

You can connect additional computers or other network enabled devices to your network by using Ethernet cables to connect them to one of the available LAN ports labeled 1,2,3,4 on

your router.

Note:

If you encounter issues connecting to your network, there may be a problem with your computer or device network settings. Please ensure that your computer or device network

settings (also called TCP/IP settings) are configured to obtain IP address settings automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server address settings

automatically.

Page 12 / 64

TRENDnet User’s Guide

TEW-823DRU

Basic Router Settings

Access your router management page

Note:

Your router management page URL/domain name

http://tew-823dru

or IP

address

http://192.168.10.1

is accessed through the use of your Internet web browser

(e.g. Internet Explorer®, Firefox®, Chrome™, Safari®, Opera™) and will be referenced

frequently in this User’s Guide.

1. Open your web browser and go to URL/domain name

http://tew-823dru

or IP address

http://192.168.10.1

. Your router will prompt you for a user name and password.

2. For added security, the router is preconfigured with a unique password. You can find

the

Password

on a sticker on the side of the router and on the label on the bottom of

the router.

Enter your

Username

and

Password

, select your preferred language, then

click

User Name:

admin

Password:

(xxxxxxxx)

Note:

User Name and Password are case sensitive.

Network Status

Basic > Network Status

This section displays a brief summary of the router’s basic settings and the connected

devices.

1. Log into your router management page (see “

Access your router management page

”

on page 9).

2. Click on

Basic

and click on

Network Status

Page 13 / 64

TRENDnet User’s Guide

TEW-823DRU

Internet:

The Internet icon displays green to indicate that your router

has successfully established an Internet connection. The Internet icon

displays orange to indicate that a physical connection has been

established on the Internet port of the router but with no successful

Internet connection has been established. The Internet icon displays

red to indicate that the Internet is physically disconnected.

Guest Network:

The Guest Network icon displays orange to indicate

that there are no wireless guest networks currently enabled. The

Guest Network icon will display green to indicate that you have at

least one wireless guest network currently enabled.

USB:

The USB icon displays orange to indicate that there are no USB

devices connect to the USB port(s). The USB icon displays green to

indicate that are USB devices connected to the USB port(s).

Wireless:

The wireless icon displays green to indicate that wireless is

enabled on both 2.4GHz and 5GHz bands. The wireless icon displays

orange to indicate that only wireless band is enabled (2.4GHz or

5GHz). The wireless icon will display red to indicate that wireless is

disabled on both 2.4GHz and 5GHz bands.

Wireless Security:

The wireless security section will display the

current security settings configured for your wireless networks. It is

strongly recommended to enable security on your wireless networks.

Connected Devices:

The connected devices section displays the list of

network devices currently connected to your router.

Wireless Settings

Basic > Wireless (2.4GHz or 5GHz)

This section outlines available management options under basic wireless sub tab for

both 2.4GHz and 5GHz wireless sections. You can refer to the page 15

Wireless

Networking & Security

to configure your wireless security settings.

1. Log into your router management page (see “

Access your router management page

”

on page 9).

2. Click on

Wireless

and click on

Basic

scroll down to

Wireless Network Settings

(2.4GHz

or 5GHz)

3. To save changes to this section, click

Apply

when finished.

•

Radio On/Off –

Click the radio on/off button to enable/disable the wireless radio.

Note:

It is recommended to keep wireless radios enabled.

New Schedule –

The schedule function allows you to define a schedule when the

wireless should be turned on. To define a new schedule, click

New Schedule

and

refer to page 33 “

Create Schedules

”. After you have created a new schedule,

click the drop-down list and the new schedule will be available for selection.

Note:

Before applying scheduling, please ensure your Time settings are configured

correct and you have defined a schedule. See page 32 to configure

Time Settings

and see page 33 “

Create Schedules

” to create a schedule.

Wireless Mode:

When applying the Wireless Mode setting, please keep in mind the

following:

•

Wireless devices that support 802.11n are backwards compatible and can connect

wirelessly at 802.11g or 802.11b.

•

Wireless devices that support 802.11ac are backwards compatible and can connect

wirelessly at 802.11n or 802.11a.

•

Connecting at 802.11b or 802.11g will limit the capability of your 802.11n

supported wireless devices from obtaining higher performance and data rates.

•

Connecting at 802.11a or 802.11n will limit the capability of your 802.11ac

supported wireless devices from obtaining higher performance and data rates.

•

Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless

network may degrade the wireless network performance below the higher

performance and data rates of 802.11n.

Page 14 / 64

TRENDnet User’s Guide

TEW-823DRU

•

Allowing 802.11a or 802.11n devices to connect to an 802.11ac capable wireless

network may degrade the wireless network performance below the higher

performance and data rates of 802.11ac.

•

Wireless devices that only support 802.11n or 802.11a will not be able to connect

to a wireless network that is set to 802.11ac only mode.

•

Wireless devices that only support 802.11b or 802.11g will not be able to connect

to a wireless network that is set to 802.11n only mode.

•

Wireless devices that only support 802.11b will not be able to connect to a wireless

network that is set to 802.11g only mode.

•

Wireless devices that only support 802.11a will not be able to connect to a wireless

network that is set to 802.11n only mode.

•

Wireless Network Name (SSID):

Enter the wireless name (SSID) for your wireless

network. This acronym stands for Service Set Identifier and is the name of your

wireless network. It differentiates your wireless network from others around you.

By default, the router’s wireless name is unique to the device. If you choose to

change the SSID, change it to a name that you can easily remember.

•

Broadcast Network Name (SSID)

Visible -

allows wireless devices to search and discover your wireless network

name (also called SSID) broadcasted by your router.

Invisible -

Turns off the ability for wireless devices to find your network. It is still

possible for wireless devices to be configured to connect to your wireless

network. Disabling this setting will disable WPS functionality.

•

Enable Auto Channel Scan –

Check this option to set your router to scan for which

wireless channels to use automatically.

•

Frequency (Channel)

– Selecting the

Auto

option will set your router to scan for the

appropriate wireless channel to use automatically. Click the drop-down list and

select the desired Channel for wireless communication. The goal is to select the

Channel that is least used by neighboring wireless networks.

•

Channel Width:

Select the appropriate channel width for your wireless network.

This setting only applies to 802.11n and 802.11ac. For greater 802.11n

performance, select

Auto 20/40MHz

(Options: 20MHz or Auto 20/40MHz). It is

recommended to use the default channel bandwidth settings.

For greater 802.11ac performance, select

Auto 20/40/80MHz

(Options: 20MHz,

Auto 20/40MHz, Auto 20/40/80MHz). It is recommended to use the default channel

width settings.

Note:

Please note that the default settings may provide more stability than the

higher channel bandwidth settings such as Auto

20/40/80MHz

for connectivity in

busy wireless environments where there are several wireless networks in the area.

20 MHz

– This mode operates using a single 20MHz channel for

wireless devices connecting at 802.11n on both 2.4GHz and 5GHz. This

setting may provide more stability than 20/40MHz (Auto) for

connectivity in busy wireless environments where there are several

neighboring wireless networks in the area.

Auto 20/40MHz (11n) or Auto 20/40/80MHz (11ac)

–When this

setting is active, this mode is capable of providing higher performance

only if the wireless devices support the channel width settings.

Enabling Auto 20/40MHz or Auto 20/40/80 MHz typically results in

substantial performance increases when connecting an 802.11ac/n

wireless client.

Page 15 / 64

TRENDnet User’s Guide

TEW-823DRU

Guest Network

Basic > Guest Network (2.4GHz or 5GHz)

Creating an isolated and separate wireless guest network (2.4GHz or 5GHz) allows

wireless clients to connect to your network for Internet access only and keep your local

LAN network safe by restricting guest access to your LAN network resources such as

shared documents and media files on your computers, network storage, and printers.

1. Log into your router management page (see “

Access your router management page

”

on page 9).

2. Click on

Basic

and click on

Guest Network

3. Review the Guest Zone settings, click

Apply

when finished.

Choose which band to enable the Guest Network (Wireless – 2.4GHz or 5GHz):

•

Enabled

–

Check this option to enable the wireless guest network.

New Schedule –

The schedule function allows you to define a schedule when the

wireless guest network should be turned on. To define a new schedule, click

New

Schedule

and refer to page 33 “

Create Schedules

”. After you have created a new

schedule, click the drop-down list and the new schedule will be available for

selection.

Note:

Before applying scheduling, please ensure your Time settings are

configured correct and you have defined a schedule. See page 32 to configure

Time Settings

and see page 33 “

Create Schedules

” to create a schedule.

•

Wireless Network Name (SSID) -

This acronym stands for Service Set Identifier and

is the name of your wireless network. It differentiates your wireless network from

others around you. It is recommended to use a different name from your primary

wireless network to a name that you can easily identify and differentiate from the

primary. You can reference your guests to access this network instead of the

primary.

•

Wireless Client Isolation

– When this option is checked, wireless client devices

connected to your guest network(s) will be restricted from accessing other guests.

•

Internet Access Only

– When this option is checked, wireless client devices

connected to your guest network(s) will be restricted from accessing your private

LAN and wireless clients connected to your primary wireless network, Internet

access only. If unchecked, allows wireless client devices connected your guest

network(s) complete access to your private LAN, primary wireless network, and

Internet.

4. Under Security Mode, you can apply a different wireless security type and key to the

guest network. Please refer to page 12 to find out about different security types and

page 13 for wireless security configuration.

•

Security Mode –

Select the wireless security to use for the guest network.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share