1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TEW-731BR
    5. /
  5. 7
Page 31 / 62 Scroll up to view Page 26 - 30
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-731BR
28
User (Optional):
The User account is an additional account used for viewing the settings
on the router management page only. Accessing the router management page using the
User account will restrict access to viewing only and will not allow any settings to be
changed.
Default User Name: user
Default Password: user
Set your router date and time
Main > Time
1. Log into your router management page (see “Access your router management page”
on
page 27
).
2. Click on
Main
, and click on
Time
.
3. Next to
Time Zone
, click the drop-down list to select your
Time Zone
.
4. Next to
Synchronize the clock with
, you can choose one of the following options:
•
Manual
– Set your router date and time manually in the
Set Time
section. To
save changes, click
Apply
.
Note:
Time is specified in 24-hour format.
OR
•
Automatic
– Set your router date and time to synchronize with an NTP
(Network Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP
server address next to
Default NTP
server, (e.g. pool.ntp.org). Next to
Daylight
Saving
, set the annual range when daylight saving is activated. To save
changes, click
Apply
.
Note
:
NTP servers are used for computers and other network devices to synchronize
time across an entire network.
5. You can verify the time/date settings next to
Local Time
at the top of the page.
Local
Time
displays the current date and time set on your router.
Manually configure your Internet connection
Main > WAN
1. Log into your router management page (see “Access your router management page”
on
page 27
).
2. Click on
Main
, and click on
WAN
.
3. In the
Connection Type
drop-down list, click the type of Internet connection provided
by your Internet Service Provider (ISP).
4. Complete the fields required by your ISP.
5. Complete the optional settings only if required by your ISP.
Page 32 / 62
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-731BR
29
6. To save changes, click
Apply
.
Note:
If you are unsure which Internet connection type you are using, please contact
your ISP.
Note:
If your ISP requires a host name to be specified, you can specify it under
Main > LAN & DHCP Server, in the
Host Name
field. To save changes, click
Apply
at
bottom of the page.
IPv6 Internet Connection Settings
Main > IPv6
IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the
number of available Internet public IP addresses due to the 128-bit IP address structure
versus IPv4 32-bit address structure. In addition, there are several integrated
enhancements compared to the most commonly used and well known IPv4 (Internet
Protocol Version 4) such as:
•
Integrated IPsec – Better Security
•
Integrated Quality of Service (QoS) – Lower latency for real-time applications
•
Higher Efficiency of Routing – Less transmission overhead and smaller routing
tables
•
Easier configuration of addressing
Note:
In order to use IPv6 Internet connection settings, it is required that your ISP
provide you with the IPv6 service. Please contact your ISP for availability and more
information about the IPv6 service.
1. Review the IPv6 Internet Connection settings and enter information settings specified
by your ISP.
•
IPv6 – Automatic
– Select
Enabled
for automatic configuration of your IPv6
address settings. Otherwise, if it is required to manually configure the
parameters provided by your ISP, select
Disabled.
•
6rd Configuration
– Select the appropriate option according to the parameters
specified by your ISP.
•
IPv4 Address
– Displays the IPv4 address automatically provided by your ISP. To
manually configure the IPv4 address settings, click on
Main > WAN
and
configure your IPv4 settings.
•
Mask Length –
Enter the IPv4 mask length used for the tunnel provided by your
ISP.
•
Assigned IPv6 Prefix
– Displays the IPv6 address automatically provided by
your ISP.
Page 33 / 62
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-731BR
30
•
Tunnel Link-Local Address
– Displays the IPv6 local link WAN (Internet)
interface address.
•
6rd Border Relay IPv4 Address
– Enter the IPv4 relay address used for the
tunnel provided by your ISP.
•
Primary IPv6 DNS Server
– Enter the primary IPv6 DNS server address provided
by your ISP.
•
Secondary IPv6 DNS Server –
Enter the secondary IPv6 DNS server address
provided by your ISP.
2. To save changes, click
Apply
.
Clone a MAC address
Main > WAN
On any home network, each network device has a unique MAC (Media Access Control)
address. Some ISPs register the MAC address of the device (usually a router or a
computer) connected directly to the modem. If your computer MAC address is already
registered with your ISP and to prevent the re-provisioning and registration process of a
new MAC address with your ISP, then you can clone the address (assign the registered
MAC address of your previous device to your new router). If you want to use the MAC
address from the previous device (computer or old router that directly connected to the
modem, you should first determine the MAC address of the device or computer and
manually enter it into your router using the clone MAC address feature.
Note:
For many ISPs that provide dynamic IP addresses automatically, typically, the
stored MAC address in the modem is reset each time you restart the modem. If you are
installing this router for the first time, turn your modem before connecting the router to
your modem. To clear your modem stored MAC address, typically the procedure is to
disconnect power from the modem for approximately one minute, then reconnect the
power. For more details on this procedure, refer to your modem’s User Guide/Manual or
contact your ISP.
1. Log into your router management page (see “Access your router management page”
on
page 27
).
2. Click on
Main
, and click on
WAN
.
3. Under your Internet connection settings, find the
MAC Address
section shown below.
4. Click either
Clone MAC Address
to clone the MAC address of the computer you are
currently using or manually enter the 12-digit MAC address of your old router.
5. To save changes, click
Apply
.
Page 34 / 62
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-731BR
31
Change your router IP address
Main > LAN & DHCP Server
In most cases, you do not need to change your router IP address settings. Typically, the
router IP address settings only needs to be changed, if you plan to use another router in
your network with the same IP address settings, if you are connecting your router to an
existing network that is already using the IP address settings your router is using, or if
you are experiencing problems establishing VPN connections to your office network
through your router.
Note:
If you are not encountering any issues or are not faced with one of the cases
described above or similar, it is recommended to keep your router IP address settings as
default.
Default Router IP Address: 192.168.10.1
Default Router Network: 192.168.10.0 / 255.255.255.0
1. Log into your router management page (see “Access your router management page”
on
page 27
).
2. Click on
Main
, and click on
LAN & DHCP Server
.
3. Enter the router IP address settings.
•
IP Address
– Enter the new router IP address.
(e.g.
192.168.200.1
)
•
Subnet Mask
– Enter the new router subnet mask.
(e.g.
255.255.255.0
)
Note:
The DHCP address range will change automatically to your new router IP
address settings so you do not have to change the DHCP address range manually to
match your new router IP address settings.
4. To save changes, click
Apply
.
Note:
You will need to access your router management page using your new router IP
address to access the router management page. (e.g. Instead of using the default
using your new router IP address will use the following format using
your new router IP address http://(new.router.ipaddress.here) to access your router
management page.
Set up the DHCP server on your router
Main > LAN & DHCP Server
Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to
automatically assign an IP address to each computer or device on your network. The
DHCP server is enabled by default on your router. If you already have a DHCP server on
your network, or if you do not want to use your router as a DHCP server, you can disable
this setting. It is recommended to leave this setting enabled.
1. Log into your router management page (see “Access your router management page”
on
page 27
).
2. Click on
Main
, and click on
LAN & DHCP Server
.
3. Review the DHCP Server settings.
•
DHCP Server
– Enable or Disable the DHCP server.
•
Start IP
– Changes the starting address for the DHCP server range. (e.g.
192.168.10.20)
•
End IP
– Changes the last address for the DHCP server range. (e.g.
192.168.10.30)
Note:
The Start IP and End IP specify the range of IP addresses to automatically
assign to computers or devices on your network.
Page 35 / 62
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-731BR
32
•
Domain Name (Optional)
– Specifies a domain name to assign to computers or
devices. (e.g.
trendnet.com
)
•
Lease Time
– Click the drop-down list to select the lease time.
Note:
The DHCP lease time is the amount of time a computer or device can keep an
IP address assigned by the DHCP server. When the lease time expires, the computer
or device will renew the IP address lease with the DHCP server, otherwise, if there is
no attempt to renew the lease, the DHCP server will reallocate the IP address to be
assigned to another computer or device.
4. To save changes, click
Apply
.
Dynamic DHCP List
– You can view the list of active lease entries for computers or
devices that have been assigned IP addresses automatically from the DHCP server on
your router.
Set up DHCP reservation
Main > LAN & DHCP Server
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
“Virtual Server” on
page 36
) or special applications (also called port triggering, see
“Special Applications” on
page 37
).
1. Log into your router management page (see “Access your router management page”
on
page 27
).
2. Click on
Main
, and click on
LAN & DHCP Server
.
3. Review the DHCP reservation settings.
•
Static DHCP
– Enable or Disable the DHCP reservation feature.
•
Name
– Enter a name for the reservation.
•
IP Address
– Enter the IP address to assign to the reservation. (e.g.
192.168.10.101)
Note:
You cannot assign IP addresses outside of the DHCP range. The IP address is
required to be within the DHCP IP address range (Start IP & End IP).
•
MAC Address
– Enter the MAC (Media Access Control) address of the computer
or network device to assign to the reservation. (e.g.
00:11:22:AA:BB:CC)
•
Add
- Saves the reservation.

Rate

3.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top