1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TEW-639GR

TRENDnet TEW-639GR Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of TRENDnet TEW-639GR router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 13
TEW-639GR
2.01
Quick Installation Guide
Page 2 / 13
Table of Contents
Version 03.04.2010
English
1
1. Before You Start
2. Hardware Installation
2
3. Configure the wireless router
3
1
Troubleshooting
5
Page 3 / 13
1. Before You Start
?
?
Web Browser: Internet Explorer (6.0 or higher)
?
Broadband Internet
?
Installed Cable or DSL Modem
A computer with a wired or wireless adapter properly installed
Package Contents
?
?
Multi-Language Quick Installation Guide
?
CD-ROM (User's Guide)
?
Cat. 5 Ethernet Cable (1.5m / 4.9ft)
?
AC Power Adapter (12V DC, 1A)
TEW-639GR
System Requirements
1
Page 4 / 13
2. Hardware Installation
2
Note:
Gather all information related to your Internet Connection before you start.
If
necessary, contact your Internet Service Provider (ISP).
Cable/DSL Modem
Internet
1.
Verify that you have an Internet connection
when connecting your computer directly to the
Cable or DSL modem or Ethernet jack.
Open
your browser (e.g. Internet Explorer) and type
in a URL (e.g. http://www.trendnet.com) in the
address bar.
2.
Connect one end of a RJ-45 cable to one of the
TEW-639GR's LAN ports. Connect the other
end of cable to the computer's Ethernet port.
4.
Connect the AC Power Adapter to the
TEW-639GR and then to a power outlet.
6.
Verify that the following panel lights are on:
Power, LAN, WAN and WLAN.
3.
Connect one end of a RJ-45 cable to the
TEW-639GR's WAN port.
Connect the other
end of the cable to your modem.
5.
Move the Power switch to the on position.
Page 5 / 13
3
3. Configure the wireless router
Note:
It is recommended that you configure the Wireless Router from a wired computer.
1.
Open your web browser, type
in the Address bar, and
then press
Enter
.
2.
Enter the User Name and Password, and then
click
OK
.
User name:
admin
By default, there is no password.
Note: User name is case sensitive.
3.
Click
Network
and then click
WAN Setting.
Then select the proper Internet
Connection
Type
.
4.
Configure the settings based on information
provided by your ISP. Then click
Apply
.
5
. Click
Wireless
and then click
Basic
.
Enter the
desired
Wireless Name (SSID)
and then click
Apply
.
The default
Wireless Name (SSID)
is
TRENDnet639.

Rate

4.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top