15.

Enter your

PPTP IP Address, PPTP Subnet Mask, PPTP Gateway IP

Address, PPTP Server IP Address, Username,

and

Password

.

Click

Next

.

16.

Go to step 22.

17.

Select

Username/Password Connection (L2TP)

as the Connection Type

and click

Next

.

9

English

Username/Password Connection (L2TP)

10

English

18.

Enter your

L2TP IP Address, L2TP Subnet Mask, L2TP Gateway IP

Address, L2TP Server IP Address, Username, and Password

.

Click

Next

.

19.

Go to step 22.

20.

Select

Static IP Address Connection

as the conection type and click

Next

.

Static IP Address Connection

11

English

21.

Enter your

IP Address, Subnet Mask, Gateway Address, Primary DNS

Address and Secondary DNS Address

that is provided by your ISP.

Click

Next

.

22.

Click

Connect

.

23.

After being redirected to the login page, close your web browser and

proceed to the next section.

12

English

4. Configure your Wireless

Networking Adapter

In this example, the TEW-601PC Wireless Utility will connect to the

TEW-611BRP.

1.

Double-click the wireless computer icon in your system tray (next to the

clock in the bottom right corner of your screen).

2.

Click

Site Survey

, click

Refresh

, and select the desired access point.

Click

Connect

.

3.

Click

OK

.

4.

Please verify your connection status.

Congratulations" Installation is now complete.

13

For help with the TEW-611BRP's configuration and advanced settings, please refer to the User's

Guide CD-ROM.

Q1.

A1.

Q2.

A2.

Q3.

A3.

I specified the IP address “192.168.0.1” in my web browser, but an error message says

#The page cannot be displayed.# How can I get into the TEW-611BRP web configuration

page?

Please verify your hardware and TCP/IP settings again by following the instructions in

sections 2-3, make sure the Power, Internet, WAN, and the LAN lights on the AP/Router's

front panel are on, and verify that the TCP/IP configuration is correct. Then, try accessing

192.168.0.1 again using your web browser.

I am not sure what type of Internet Account I have for my Cable/DSL connection, How do

I find out?

You can simply contact your Internet Service Provider's (ISP) Customer Service or

Technical Support Department for the correct information.

I set up my Internet connection type and saved it, but I still cannot connect to the

Internet. What should I do?

Option 1: On the TEW-611BRP's configuration menu, click the Status tab at the top of

the page, and then scroll down to the WAN section. Click the WAN IP Release button, and

then click the WAN IP Renew button. This will allow the AP/Router to refresh the connection

with your ISP. Then, try accessing a website such as http://www.trendnet.com with your

Internet browser.

Option 2: Turn off your Cable/DSL modem, AP/Router, and your PC. Turn on the Cable/DSL

modem, and wait 60 seconds. Then, turn on the AP/Router, followed by your PC. This simple

power cycle normally helps the AP/Router find your Internet connection. Then, try browsing a

website such as http://www.trendnet.com with your web browser.

Troubleshooting

Note:

For help with the TEW-611BRP's configuration and advanced settings, please refer

to the User's Guide CD-ROM.

If you still encounter problems setting up your AP/Router, we can help. Please have your Internet

account information ready, (ISP, Account Type) and contact us using the information below.

Certifications

This equipment has been tested and found to comply with

FCC and CE Rules.

Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including

interference that may cause undesired operation.

NOTE:

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV

INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT.

SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO

OPERATE THE EQUIPMENT.