Page 6 / 16
Scroll up to view Page 1 - 5
4
3. Configure your AP/Router
English
The following section will help you configure your AP/Router to connect to the
Internet and your PCs. The setup differs and is dependent on the type of
Internet connection you have. If you are not sure what type of connection you
have, please contact your ISP to obtain the required information, which is listed
in the
Prepare for Installation
section at the beginning of this Quick
Installation Guide.
1.
Open your web browser, type
in the Address bar, and
press
Enter
.
2.
Click
login
.
NOTE:
To reset the password on the AP/Router, refer to the User's
Guide CD-ROM.
3.
Click
Launch Internet Connection Setup Wizard
.
Page 7 / 16
5
English
4.
Click
Next
.
5.
If you want to change your password for your router, then type the new
password in the
Password
and
Verify Password
fields. Otherwise, click
Next
.
6.
Choose the appropriate Time Zone from the pull down menu, and click
Next
.
Page 8 / 16
English
6
7.
Select your Connection Type [ DHCP Connection (Dynamic IP Address),
Username/Password Connection (PPPoE), Username/Password Connection
(PPTP), Username/Password Connection (L2TP), Static IP Address
Connection] and proceed to appropriate subset of instructions listed below.
8.
Select
DHCP Connection (Dynamic IP Address)
as the Connection Type
and click
Next
.
DHCP Connection (Dynamic IP Address)
Page 9 / 16
7
English
9.
If your ISP requires you to enter a
MAC Address
and
Hostname
, enter the
information in the appropriate fields.
Otherwise, click
Next
.
10.
Go to step 22.
11.
Select
Username/Password Connection (PPPoE)
and click
Next
.
Username/Password Connection (PPPoE)
Page 10 / 16
12.
Type your
username
and
password
in the appropriate fields.
If you ISP
requires you to enter your
Service Name
, type the information in the
appropriate field.
Otherwise, click
Next
.
14.
Select
Username/Password Connection (PPTP)
as the connection type
and click
Next.
13.
Go to step 22.
8
English
Username/Password Connection (PPTP)
19216811.live