Page 6 / 14
Scroll up to view Page 1 - 5
4
5.
Under the IP Address tab, click on
Specify!an!IP!address
and enter
192.168.0.50 for IP address and 255.255.255.0 for Subnet Mask and click
OK
.
6.!
Click
OK.
English
Page 7 / 14
5
English
7.!
At this point, the installation may require files from your Windows CD-ROM.
If you are prompted for the location of these files, insert Windows 98 CD-
ROM into your CD-ROM drive and select CD-ROM drive.
8.
After the files load, the System Settings Change message appears, click
Yes
to reboot your system.
9.
Your computer is now ready to access and configure the Access Point.
NOTE:
If this message does not appear, restart your computer
manually.
Page 8 / 14
6
English
Windows 2000/XP
1.
Find the
Start!
button located on the Desktop.
2.
Click
!Start
, and click on
Control!Panel
.
For Windows 2000, click
Start
,
highlight
Settings
, and click
Control!Panel
.
3.
Double-Click the
Network!Connection
Icon.
4.
Right-Click on the
Local!Area!Connection
icon and then click on
!
Properties
. The Local Area Connection Properties box will appear.
Page 9 / 14
7
English
5.
Under the
General
tab, locate and click I
nternet!Protocol!TCP/IP!
and then
click
Properties
. The Internet Protocol (TCP/IP) Properties box will appear.
6.
Click on
Use!the!following!IP!address
and 255.255.255.0 for Subnet Mask, and click
OK
.
Page 10 / 14
8
English
7.
Click
OK
.
8.
Your computer is ready to access and configure the Access Point.
19216811.live