Wireless Router user’s manual

– 48 –

Management

This screen enables you to set up SNMP and remote management features.

The following functions are covered in this section:

•

SNMP

•

Remote Management

SNMP

This screen enables you to configure SNMP.

Enabled/Disabled:

Click to enable or disable SNMP.

System Name:

Displays the name given to the router.

System Location:

Displays the location of the router (normally, the DNS name).

System Contact:

Displays the contact information for the person responsible for the router.

Community:

SNMP system name for exchanging SNMP community messages. The name can be used to limit

SNMP messages passing through the network. The default name is 'public.'

Trap Receiver:

Type the name of the destination PC that will receive trap messages.

Remote Management

This screen enables you to set up remote management. Using remote management, the router can be config-

ured through the WAN via a Web browser. A user name and password are required to perform remote

management.

HTTP:

Enables you to set up HTTP access for remote management.

•

Enable:

Click to enable or disable HTTP access for remote management.

•

Remote IP Range:

Type the range of IP addresses that can be used for remote access.

Downloaded from

www.Manualslib.com

manuals search engine

– 49 –

Telnet:

Enables you to set up Telnet access for remote management.

•

Enable:

Click to enable or disable Telnet access for remote management.

•

Remote IP Range:

Type the range of IP addresses that can be used for remote access.

Allow to Ping WAN Port:

Type a range of router IP addresses that can be pinged from remote locations.

UPNP Enable:

Click to enable or disable UPNP.

Gaming mode:

Click to enable or disable Game mode.

Tools

This page enables you to restart the system, save and load different settings as profiles, restore factory default

settings, run a setup wizard to configure router settings, upgrade the firmware, and ping remote IP addresses.

The following functions are covered in this section:

•

Restart

•

Settings

•

Firmware

•

Ping Test

•

Setup Wizard

Downloaded from

www.Manualslib.com

manuals search engine

Wireless Router user’s manual

– 50 –

Restart

Click

Restart

to restart the system in the event the system is not performing correctly.

Downloaded from

www.Manualslib.com

manuals search engine

– 51 –

Settings

This screen enables you to save your settings as a profile and load profiles for different circumstances. You can

also load the factory default settings, and run a setup wizard to configure the router and router interface.

Save Settings:

Click to save the current configuration as a profile that you can load when necessary.

Load Settings:

Click

Browse

and go to the location of a stored profile. Click

Load

to load the profile's settings.

Restore Factory Default Settings:

Click to restore the default settings. All configuration changes you have

made will be lost.

Firmware

This screen enables you to keep the router firmware up to date.

Follow these instructions:

1.

Download the latest firmware from the manufacturer's Web site, and save it to your disk.

2. Click

Browse

and go to the location of the downloaded firmware file.

3.

Select the file and click Upgrade to update the firmware to the latest release.

Downloaded from

www.Manualslib.com

manuals search engine

Wireless Router user’s manual

– 52 –

Ping Test

The ping test enables you to determine whether an IP address or host is present on the Internet.

Type the host name or IP ad-

dress in the text box and click

Ping. If the ping is successful,

you see a screen similar to the

one shown here:

If the ping is unsuccessful, you

see a screen like the the one

shown:

Setup Wizard

The setup wizard enables you to configure the router quickly and conveniently. Follow these instructions:

1. In the Settings

screen Setup Wizard

section, click Run

Wizard. The screen

shown to the right

appears.

2. Click

Next

. You are

prompted to select a

password. Type a

password in the text

box, and then type it

again for verification.

Downloaded from

www.Manualslib.com

manuals search engine