– 43 –

The IP filter profiles are listed in the table at the bottom of the page.

Note!

When selecting items in the table at the bottom, click

anywhere in the item. The line is selected, and the

fields automatically load the item's parameters, which

you can edit:

Click anywhere in the line to select it.

Enable:

Click to enable or disable the IP address filter.

Range Start:

Type the minimum address for the IP range. IP addresses falling between this value and the

Range End are not allowed to access the Internet.

Range End:

Type the minimum address for the IP range. IP addresses falling between this value and the

Range Start are not allowed to access the Internet.

Add:

Click to add the IP range to the table at the bottom of the screen.

Update:

Click to update information for the range if you have selected a list item and have made changes.

Delete:

Select a list item and click

Delete

to remove the item from the list.

Clear:

Click Clear to erase all fields and enter new information.

Downloaded from

www.Manualslib.com

manuals search engine

Wireless Router user’s manual

– 44 –

Virtual Server

This screen enables you to create a virtual server via the router. If the router is set as a virtual server, remote

users requesting Web or FTP services through the WAN are directed to local servers in the LAN. The router re-

directs the request via the protocol and port numbers to the correct LAN server.

The Virtual Sever profiles are listed in the table at the bottom of the page.

Note!

When selecting items in the table at the bottom, click

anywhere in the item. The line is selected, and the

fields automatically load the item's parameters, which

you can edit:

Click anywhere in the line to select it.

Enable:

Click to enable or disable the virtual server.

Name:

Type a descriptive name for the virtual server.

Protocol:

Select the protocol (TCP or UDP) you want to use for the virtual server.

Private Port:

Type the port number of the computer on the LAN that is being used to act as a virtual server.

Public Port:

Type the port number on the WAN that will be used to provide access to the virtual server.

LAN Server:

Type the LAN IP address that will be assigned to the virtual server.

Add:

Click to add the virtual server to the table at the bottom of the screen.

Update:

Click to update information for the virtual server if you have selected a list item and have made

changes.

Delete:

Select a list item and click

Delete

to remove the item from the list.

Clear:

Click Clear to erase all fields and enter new information.

Downloaded from

www.Manualslib.com

manuals search engine

– 45 –

Special AP

This screen enables you to specify special applications, such as games that require multiple connections that

are inhibited by NAT.

The special applications profiles are listed in the table at the bottom of the page.

Note!

When selecting items in the table at the bottom, click

anywhere in the item. The line is selected, and the

fields automatically load the item's parameters, which

you can edit:

Click anywhere in the line to select it.

Enable:

Click to enable or disable the application profile. When enabled, users will be able to connect to the

application via the router WAN connection. Click Disabled on a profile to prevent users from accessing the ap-

plication on the WAN.

Name:

Type a descriptive name for the application.

Trigger:

Defines the outgoing communication that determines whether the user has legitimate access to the

application.

•

Protocol:

Select the protocol (TCP, UDP, or ICMP) that can be used to access the application.

•

Port Range:

Type the port range that can be used to access the application in the text boxes.

Incoming:

Defines which incoming communications users are permitted to connect with.

•

Protocol:

Select the protocol (TCP, UDP, or ICMP) that can be used by the incoming communication.

•

Port:

Type the port number that can be used for the incoming communication.

Add:

Click to add the special application profile to the table at the bottom of the screen.

Update:

Click to update information for the special application if you have selected a list item and have made

changes.

Delete:

Select a list item and click

Delete

to remove the item from the list.

Clear:

Click Clear to erase all fields and enter new information.

Downloaded from

www.Manualslib.com

manuals search engine

Wireless Router user’s manual

– 46 –

DMZ

This screen enables you to create a DMZ for those computers that cannot access Internet applications properly

through the router and associated security settings.

Enable:

Click to enable or disable the DMZ.

DMZ Host IP:

Type a host IP address for the DMZ. The computer with this IP address acts as a DMZ host with

unlimited Internet access.

Note!

Any clients added to the DMZ exposes the clients to

security risks such as viruses and unauthorized ac-

cess.

Apply:

Click to save the settings.

Firewall Rule

This screen enables you to set up the firewall. The router provides basic firewall functions, by filtering all the

packets that enter the router using a set of rules. The rules are in an order sequence list--the lower the rule

number, the higher the priority the rule has.

Downloaded from

www.Manualslib.com

manuals search engine

– 47 –

The rule profiles are listed in the table at the bottom of the page.

Note!

When selecting items in the table at the bottom, click

anywhere in the item. The line is selected, and the

fields automatically load the item's parameters, which

you can edit:

Click anywhere in the line to select it.

Enable:

Click to enable or disable the firewall rule profile.

Name:

Type a descriptive name for the firewall rule profile.

Action:

Select whether to allow or deny packets that conform to the rule.

Inactive Timeout:

Type the number of seconds of network inactivity that elapse before the router refuses the

incoming packet.

Source:

Defines the source of the incoming packet that the rule is applied to.

•

Interface:

Select which interface (WAN or LAN) the rule is applied to.

•

IP Range Start:

Type the start IP address that the rule is applied to.

•

IP Range End:

Type the end IP address that the rule is applied to.

Destination:

Defines the destination of the incoming packet that the rule is applied to.

•

Interface:

Select which interface (WAN or LAN) the rule is applied to.

•

IP Range Start:

Type the start IP address that the rule is applied to.

•

IP Range End:

Type the end IP address that the rule is applied to.

•

Protocol:

Select the protocol (TCP, UDP, or ICMP) of the destination.

•

Port Range:

Select the port range.

Add:

Click to add the rule profile to the table at the bottom of the screen.

Update:

Click to update information for the rule if you have selected a list item and have made changes.

Delete:

Select a list item and click

Delete

to remove the item from the list.

New:

Click

New

to erase all fields and enter new information.

Priority Up:

Select a rule from the list and click

Priority Up

to increase the priority of the rule.

Priority Down:

Select a rule from the list and click

Priority Down

to decrease the priority of the rule.

Update Priority:

After increasing or decreasing the priority of a rule, click

Update Priority

to save the changes.

Downloaded from

www.Manualslib.com

manuals search engine