TRENDnet TEG-S2620is Router Manual PDF (Setup & Configuration Guide)

Page 6 / 13 Scroll up to view Page 1 - 5

English

4

HyperTerminal

2.

Go to Start -> Programs ->

Accessories -> Communications ->

HyperTerminal.

3.

Enter a name, choose an icon and

then click

OK

.

4.

Select the correct COM port (e.g.

COM1, COM2) and then click

OK

.

1.

Connect the RS-232 cable from a

serial port on your Windows PC to

the console port on your computer.

Page 7 / 13

English

5

6.

Press

Enter

.

8.

Press

Enter

.

Your configuration is now complete.

For detailed information regarding the

TEG-S2620is

’s

configuration and

advanced settings, please refer to the Troubleshooting section, User's Guide

CD-ROM, or TRENDnet's website at http://www.trendnet.com.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at:

www.trendnet.com/registe

r

Thank you for choosing TRENDnet

Register Your Product

To ensure the highest level of customer service and support, please take a moment to

register your product Online at:

www.trendnet.com/registe

r

Thank you for choosing TRENDnet

7.

Enter the User Name.

By default:

User Name:

admin

7.

Enter the Password, and then

press Enter. By default:

password:

admin

5.

Configure the following setting,

click

Apply

and then click

OK

:

Bits per second: 9600

Data bits:

8

Parity:

None

Stop bits:

1

Flow control:

None

Page 8 / 13

6

Troubleshooting

Q1:

How do I configure TCP/IP settings on my computer?

Q2:

A2:

I typed http://192.168.0.1 in my Internet Browser's Address Bar, but an error message

says “The page cannot be displayed.” How can I get into the TEG-S2620is's web

configuration page?

First, check your hardware settings again by following the instructions in section 2.

Second, make sure the Power and LNK/ACT lights are lit.

Third, make sure the TCP/IP

settings are configured properly (see Q1). Fourth, since the Switch's default IP address is

192.168.0.1, make sure that no other network devices are assigned an IP address of

192.168.0.1.

1.

Go into the

Control Panel

, click

Network and

Internet

, click

Network and Sharing Center

, click

Manage Network Connections

and then right-click

the

Local Area Connection

icon and then click

Properties

.

1.

Go into the

Control Panel

, double-click the

Network

Connections

icon, and then right-click the

Local Area

Connection

icon and then click

Properties

.

2.

Click

Internet Protocol Version 4(TCP/IPv4)

and

then click

Properties.

Then

click on

Use the

following IP address

, and make sure you assign

your network adapter an IP address in the subnet of

192.168.0.x.

Windows Vista

Windows XP/2000

1.

Click

Internet Protocol (TCP/IP)

and then click

Properties.

Then

click on

Use the following IP

address

, and make sure you assign your network

adapter an IP address in the subnet of 192.168.0.x.

Page 9 / 13

Q3:

Q4:

Q5:

A5:

If my network's IP is different than the Switch's range, what should I do?

You should still configure the Switch first. After all the settings are applied, go to the Switch's

configuration page, click on Administrator, click IP Configuration, change the IP address of the

Switch to match your network's IP and then click

Apply

.

What are the default port settings for configuring the Switch through the console port

using HyperTerminal?

Bits per Second: 9600; Data bits: 8; Parity: None; Stop bits: 1; Flow control: None.

I changed the IP address of the switch, but I forgot it.

How do I reset my TEG-S2620is?

Follow the instructions below:

1)

Connect the RS-232 cable from a serial port on your Windows PC to the console port on

your computer.

2)

Go to Start -> Programs -> Accessories -> Communications -> HyperTerminal.

3)

Enter a name, select an icon and then click

OK

.

4)

Select the correct COM port (e.g. COM1, COM2) and then click

OK

.

5)

Configure the following settings, click

Apply

and then click

OK

:

Bits per second: 9600

Data bits:

8

Parity:

None

Stop bits:

1

Flow control:

None

6)

Press

Enter

.

7)

Enter the user name.

By default, the user name is

admin

.

8)

Press

Enter

.

9)

Enter the password.

By default, password is

admin

.

10) Press

Enter

.

11)

Press Tab to navigate to

System Reset Configuration

and then press Enter.

12)

Press Tab to navigate to

Factory Default

and then press Enter.

13) Press

Y

to continue.

The default IP address of the switch is 192.168.0.1.

If you still encounter problems or have any questions regarding the

TEG-S2620is,

please contact

TRENDnet's Technical Support Department.

A3:

7

Page 10 / 13

8

Limited Warranty

- 5-Year Limited Warranty

TRENDnet warrants its products against defects in material and workmanship, under

normal use and service, for the following lengths of time from the date of purchase.

TEG-S2620is

If a product does not operate as warranted above during the applicable warranty period,

TRENDnet shall, at its option and expense, repair the defective product or deliver to

customer an equivalent product to replace the defective item. All products that are

replaced will become the property of TRENDnet. Replacement products may be new or

reconditioned.

TRENDnet shall not be responsible for any software, firmware, information, or memory

data of customer contained in, stored on, or integrated with any products returned to

TRENDnet pursuant to any warranty.

There are no user serviceable parts inside the product. Do not remove or attempt to

service the product through any unauthorized service center. This warranty is voided if

(i) the product has been modified or repaired by any unauthorized service center, (ii) the

product was subject to accident, abuse, or improper use (iii) the product was subject to

conditions more severe than those specified in the manual.

Warranty service may be obtained by contacting TRENDnet office within the applicable

warranty period for a Return Material Authorization (RMA) number, accompanied by a

copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-

authorized by TRENDnet with RMA number marked on the outside of the package, and

sent prepaid, insured and packaged appropriately for safe shipment.

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share