Given below is full router user manual of TRENDnet TEG-S2620is router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 13
English
......................................................................................................
Troubleshooting
.........................................................................................
1
1
3
2
6
1. Before You Start
2. Hardware Installation
........................................................................
3. Configure the Switch
.........................................................................
................................................................................
Table of Contents
Version 04.04.2009
Page 3 / 13
System Requirements
Optional Equipment
Application
Package Contents
1. Before You Start
English
1
?
?
Multi-Language Quick Installation
Guide
?
User's Guide CD-ROM
?
RS-232 cable
?
Power Cord
?
Rack Mount Kit
?
Rubber Feet
TEG-S2620is
?
?
A computer with a network adapter properly installed
?
A RJ-45 network cable
Web Browser: Internet Explorer (6 or 7)
?
?
Mini-GBIC module (e.g. TEG-MGBSX, TEG-MGBS10, TEG-MGBS40,
TEG-MGBS80, TEG-MGBS10D35, TEG-MGBS40D35) for Mini-GBIC slots.
EIA standard 19” rack
24-Port 10/100Mbps Layer 2 Stackable Switch with
2 shared Gigabit Ports and Mini-GBIC Slots
(TEG-S2620is)
RS-232
Workstation with
10/100Mbps PCI Adapter
(TE100-PCIWN)
Workstation
Multi-Mode Fiber
Mini-GBIC Modules
(TEG-MGBSX)
Multi-Mode Fiber
Mini-GBIC Modules
(TEG-MGBSX)
Workstation with
PCI Adapter
(TEG-PCITXR)
1000Mbps
Fiber
10/100Mbps
Page 4 / 13
2. Hardware Installation
English
2
2.
Connect a RJ-45 network cable
from the computer to an available
Ethernet port on the TEG-S2620is.
3.
Verify that the following panel lights
are on:
POWER
and
LINK/ACT
.
1.
Connect the
Power Cord
to
the TEG-S2620is and then to a
power outlet.
Note:
The Mini-GBIC slots are shared with port 25 and 26 Gigabit Ethernet ports.
When the Mini-GBIC slots are in use, port 25 and 26 Gigabit Ethernet ports are
disabled.
Page 5 / 13
English
3
3. Configure the Switch
Note:
It is recommended that you configure the Switch from a wired computer.
Before the Switch can be configured, a Static IP address must be assigned to
your computer's network adapter in the subnet of 192.168.0.x.
Since the
Switch's default IP address is
192.168.0.1 , make sure no other network
(Refer to Troubleshooting
section on how to configure TCP/IP settings on your PC.)
Web Browser
1.
Open your web browser, type
in the Address
bar, and then press
Enter
.
3.
Select the desired options for
configuring the SNMP switch.
2.
Enter the User Name and
Password, and then click
OK.
By default:
User Name:
admin
Password:
admin
19216811.live