Page 201 / 258
Scroll up to view Page 196 - 200
TL-MR3020
Portable 3G/4G Wireless N Router
6.3 Quick Setup
Please refer to
Chapter 3: "Quick Installation Guide."
6.4 WPS
WPS
(Wi-Fi Protected Setup)
can help you to quickly and securely connect to a network. This
section will guide you to add a new wireless device to an existing network quickly by function.
The WPS function is only available when the Operation Mode is set to Access Point and
Multi-SSID. Here we take the Access Point mode for example. Select menu “
WPS
”, you will see
the next screen shown in Figure 6-2.
Figure 6-2
WPS
WPS Status -
To enable or disable the WPS function here.
Current PIN -
The current value of the device's PIN is displayed here. The default PIN of
the device can be found i
Restor
n the label or User Guide.
e PIN -
Restore the PIN of the device to its default.
PIN -
Click this button, and then you can get a new random value for the
device's PIN. You can ensure the network security by generating a new PIN.
Add device -
You can add a new device to the existing network manually by clicking this
button.
Gen New
-190-
Page 202 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and device using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration
of the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
I.
By PBC
and the Push Button Configuration (PBC)
the network by PBC with the following two methods.
Method One:
example.
If the wireless adapter supports Wi-Fi Protected Setup
method, you can add it to
Step 1:
Press the WPS/RESET button on the front panel of the Router for less than 5 seconds.
Step 2:
Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen appears. Click
Finish
to complete the WPS
confi
guration.
-191-
Page 203 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
The WPS Configuration Screen of Wireless Adapter
Method Two:
Step 1: Press the WPS/RESET button on the front panel of the Router for less than 5 seconds.
Step 2: For the configuration of the wireless adapter, please choose “
Push the button on my
access point
”
in the
configuration utility of the WPS as below, and click
Next
.
-192-
Page 204 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
The WPS Configuration Screen of Wireless Adapter
Step 3: Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
-193-
Page 205 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Method Three:
Step 1. Keep the default WPS Status as
Enabled
and click the
Add device
button in Figure
4-2, then the following screen will appear.
Figure 6-3
Add A New Device
Step 2. Choose
Press the button of the new device
in two minutes and click
Connect
.
Step 3.
Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 4. Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
-194-
19216811.live