TP-Link TL-MR3020 Router Manual PDF (Setup & Configuration Guide)

Page 211 / 258 Scroll up to view Page 206 - 210

TL-MR3020

Portable 3G/4G Wireless N Router



Region

-

Select your region from the pull-down list. This field specifies the region where the

wireless function of the device can be used. It m

ay be illegal to use the wireless function of

the device in a region other than one of those specified in this field. If your country or region is

not listed, please contact your local government agency for assistance.

When you select your local region from the pull-down list, click the

Save

button

,

then the Note

Dialog appears. Click

OK

.

Note Dialog

n



Channel

-

Determines the operating frequency to be used. It is not necessary to change

r nearby access

point.



Mode -

Select the desired wireless mode. The options are:



11b only -

Only 802.11b wireless stations can connect to the device.



11g only -

Only 802.11g wireless stations can connect to the device.



11n only -

Only 802.11n wireless stations can connect to the device.



11bg mixed -

Both 802.11b and 802.11g wireless stations can connect to the device.



11bgn mixed -

All 802.11b, 802.11g and 802.11n wireless stations can connect to the

device.



Channel Width

-

Determines the channel width to be used. It is unnecessary to change

the default value unless required.



Max Tx Rate -

Specifies the maximum transmit rate of the device through this field.



Enable Wireless Radio -

Select or deselect this check box to allow or deny wireless

ith, they will detect the SSID broadcast by the

device.



Note:

Limited by local law regulations, version for North America does not have region selectio

option.

the wireless channel unless you notice interference problems with anothe

stations to access the device.



Enable SSID Broadcast

-

Select or deselect this check box to allow or deny the device to

broadcast its name (SSID) on the air. If it’s allowed, when wireless clients survey the local

area for wireless networks to associate w

-200-

Page 212 / 258

TL-MR3020

Portable 3G/4G Wireless N Router



Note:

To apply any settings you have altered on the page, please click the

Save

button, and then you

will be reminded to reboot the device.

2) Client:

This mode allows the device to act as a wireless station to enable wired host(s) to

access an AP.

Figure 6-8 Wireless Settings in Client mode



SSID -

If you select the radio button before

SSID

, the AP client will connect to the AP

according to SSID. Enter the SSID of AP that you want to access.



MAC of AP -

If you select the radio button before

MAC of AP

, the AP client will connect to

the AP according MAC address. Enter the MAC address of AP that you want to access.

the pull-down list. This field specifies the region where

the wireless function of the device can be used. It may be illegal to use the wireless

your



Region

-

Select your region from

function of the device in a region other than one of those specified in this field. If

country or region is not listed, please contact your local government agency for

assistance.

When you select your local region from the pull-down list, click the

Save

button

,

then the

Note Dialog appears. Click

OK

.

-201-

Page 213 / 258

TL-MR3020

Portable 3G/4G Wireless N Router

Note Dialog



Note:

Limited by local law regulations, version for North America does not have region selection

option.



Channel Width

-

Determines the channel width to be used. It is unnecessary to change

the default value unless required.



Enable Wireless Radio -

Select or deselect this check box to allow or deny wireless

stations to access the device.

Click the

Survey

button to detect the SSIDs in the local area.



Note:

To apply any settings you have altered on the page, please click the

Save

button, and then you

will be reminded to reboot the device.

3) Repeater:

This mode allows the AP with its own BSS to relay data to a root AP to which it

is associated with WDS enabled. The wireless repeater relays signal between its stations

and the root AP for greater wireless range.

-202-

Page 214 / 258

TL-MR3020

Portable 3G/4G Wireless N Router

Figure 6-9 Wireless Settings in Repeater mode

n one of those specified in this field. If your

country or region is not listed, please contact your local government agency for

assistance.

When you select your local region from the pull-down list, click the

Save

button

,

then the

Note Dialog appears. Click

OK

.



MAC of AP -

Enter the MAC address of the root AP of which you want to expand wireless

range.



Region

-

Select your region from the pull-down list. This field specifies the region where

the wireless function of the device can be used. It may be illegal to use the wireless

function of the device in a region other tha

Note Dialog



Note:

Limited by local law regulations, version for North America does not have region selection

option.



Channel Width

-

Determines the channel width to be used. It is unnecessary to change

the default value unless required.

-203-

Page 215 / 258

TL-MR3020

Portable 3G/4G Wireless N Router



Max Tx Rate -

Specifies the maximum transmit rate of the device through this field.



Enable Wireless Radio -

Select or deselect this check box to allow or deny wireless

stations to access the device.

Click the

Survey

button to detect the SSIDs in the local area.



Note:

To apply any settings you have altered on the page, please click the

Save

button, and then you

will be reminded to reboot the device.

4) Bridge with AP:

This mode can bridge the AP and up to 4 APs also in bridge mode to

connect two or more wired LANs.

Figure 6-10 Wireless Settings in Bridge with AP mode



Wireless Network Name (also called SSID) -

Identifies your wireless network name. Create

a name up to 32 characters and make s

s points in the wireless network with the

same SSID. The default SSID is TP-LINK_POCKET_3020_XXXXXX (XXXXXX indicates the

six characters of each device’s MAC address). This value is case-sensitive. For



-

Select your region from the pull-down list. This field specifies the region where

other than one of those specified in this field. If your

ure all wireles

last unique

example,

TEST

is NOT the same as

test

.

Region

the wireless function of the device can be used. It may be illegal to use the wireless

function of the device in a region

-204-

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share