Page 181 / 258
Scroll up to view Page 176 - 180
TL-MR3020
Portable 3G/4G Wireless N Router
There are two submenus under the Bandwidth Control menu as shown in Figure 5-65:
Control
Settings
and
Rules List
. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
5.13.1 Control Settings
Choose menu “
Bandwidth Control
→
Control Settings
”, and then you can configure the
Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should
be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line
Type and ask your ISP for the total bandwidth of the egress and ingress.
Figure 5-66 Bandwidth Control Settings
Enable Bandwidth Control -
Check this box so that the Bandwidth Control settings can
take effect.
Line Type
-
Select the right type for you network connection. If you don’t know how to
choose, please ask your ISP for the information.
Egress Bandwidth
- The upload speed through the WAN port
.
Ingress Bandwidth -
The download speed through the WAN port.
5.13.2 Rules List
Choose menu “
Bandwidth Control
→
Rules List
”, and then you can view and configure the
Bandwidth Control rules in the screen below.
Figure 5-67 Bandwidth Control Rules List
Description
-
This is the information about the rules such as address range.
-170-
Page 182 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Egress bandwidth -
This field displays the max and mix upload bandwidth through the
WAN port, the default is 0.
Ingress bandwidth -
This field displays the max and mix download bandwidth through the
WAN port, the default is 0.
Enable -
This displays the status of the rule.
Modify -
Click
Modify
to edit the rule. Click
Delete
to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1.
Click
Add New…
shown in Figure 5-67, you will see a new screen shown in Figure 5-68.
2.
Enter the information like the screen shown below.
Figure 5-68 Bandwidth Control Rule Settings
3.
Click the
Save
button.
5.14 IP & MAC Binding Setting
Figure 5-69 the IP & MAC Binding menu
There are two submenus under the IP &MAC Binding menu (shown in Figure 5-69):
Binding
Settings
and
ARP List
. Click any of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.
5.14.1 Binding Settings
This page displays the
IP & MAC Binding Setting
table; you can operate it in accord with your
desire (shown in
Figure 5-70).
-171-
Page 183 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Figure 5-70 Binding Setting
MAC Address
-
The MAC address of the controlled computer in the LAN.
IP Address -
The assigned IP address of the controlled computer in the LAN.
Bind
-
Check this option to enable ARP binding for a specific device.
Modify
-
To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the
Add New…
button or
Modify
button, and then you will go to the next page. This page is used for adding or
modifying an IP & MAC Binding entry
(shown in Figure 5-71).
Figure 5-71
IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
1.
Click the
Add New...
button as shown in Figure 5-70.
2.
Enter the MAC Address and IP Address.
3.
Select the Bind checkbox.
4.
Click the
Save
button to save it.
To modify or delete an existing entry, follow the steps below.
1.
Find the desired entry in the table.
2.
Click
Modify
or
Delete
as desired on the
Modify
column.
To find an existing entry, follow the steps below.
-172-
Page 184 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
1.
Click the
Find
button as shown in Figure 5-70.
2.
Enter the MAC Address or IP Address.
3.
Click the
Find
button in the page as shown in Figure 5-72.
Figure 5-72
Find IP & MAC Binding Entry
Click the
Enable All
button to make all entries enabled.
Click the
Delete All
button to delete all entries.
5.14.2 ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC
Binding entries (shown in Figure 5-73).
Figure 5-73
ARP List
1.
MAC Address
-
The MAC address of the controlled computer in the LAN.
2.
IP Address
-
The assigned IP address of the controlled computer in the LAN.
3.
Status
-
Indicates whether or not the MAC and IP addresses are bound.
4.
Configure
-
Load or delete an item.
Load
-
Load the item to the IP & MAC Binding list.
-173-
Page 185 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Delete
-
Delete the item.
Click the
Bind All
button to bind all the current items, available after enable.
Click the
Load All
button to load all items to the IP & MAC Binding list.
Click the
Refresh
button to refresh all items.
Note:
An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been
loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without
interference to the IP & MAC Binding list.
5.15 Dynamic DNS
Choose menu “
Dynamic DNS
”, and you can configure the Dynamic DNS function.
The Router offers the
DDNS
(Dynamic Domain Name System) feature, which allows the
hosting of a website, FTP server, or e-mail server with a fixed domain name (named by yourself)
and a dynamic IP address, and then your friends can connect to your server by entering your
domain name no matter what your IP address is. Before using this feature, you need to sign up
for DDNS service providers such as
www.comexe.cn
,
www.dyndns.org
, or
www.no-ip.com
. The
Dynamic DNS client service provider will give you a password or key.
5.15.1 Comexe.cn DDNS
If the dynamic DNS
Service Provider
you select is
www.comexe.cn
, the page will appear as
shown in
Figure 5-74
.
-174-
19216811.live