1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-MR3020
    5. /
  5. 35
Page 171 / 258 Scroll up to view Page 166 - 170
TL-MR3020
Portable 3G/4G Wireless N Router
3.
Click
Next
when finishing creating the access target entry, and the next screen will appear
as shown in Figure 4-51.
Figure 5-50
Quick Setup – Create an Advanced Schedule Entry
Schedule Description
- In this field, create a description for the schedule. Note that
this description should be unique (e.g. Schedule_1).
Day
- Choose Select Days and select the certain day (days), or choose Everyday.
Time
- Select "24 hours", or specify the Start Time and Stop Time yourself.
Start Time
- Enter the start time in HHMM format (HHMM are 4 numbers). For
example 0800 is 8:00.
Stop Time
- Enter the stop time in HHMM format (HHMM are 4 numbers). For
example 2000 is 20:00.
4.
Click
Next
when finishing creating the advanced schedule entry, and the next screen will
appear as shown in Figure 4-52.
Figure 5-51
Quick Setup – Create an Internet Access Control Entry
-160-
Page 172 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Rule
- In this field, create a name for the rule. Note that this name should be unique
(e.g. Rule_1).
Host
- In this field, select a host from the drop-down list for the rule. The default value
is the
Host Description
you set just now.
Target
- In this filed, select a target from the drop-down list for the rule. The default
value is the
Target Description
you set just now.
Schedule
- In this field, select a schedule from the drop-down list for the rule. The
default value is the
Schedule Description
you set just now.
Status
- In this field, there are two options,
Enable
or
Disable
. Select
Enable
so that
the rule will take effect. Select
Disable
so that the rule won't take effect.
5.
Click
Finish
to complete adding a new rule.
Method Two:
1.
Click the
Add New…
button and the next screen will pop up as shown in Figure 5-52.
2.
Give a name (e.g. Rule_1) for the rule in the
Rule Name
field.
3.
Select a host from the
Host
drop-down list or choose “
Click Here To Add New Host List
”.
4.
Select a target from the
Target
drop-sown list or choose “
Click Here To Add New Target
List
”.
5.
Select a schedule from the
Schedule
drop-down list or choose “
Click Here To Add New
Schedule
”.
6.
In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
7.
Click the
Save
button.
Figure 5-52
Add Internet Access Control Entry
For example
: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in
the LAN to access the Internet, you should follow the settings below:
-161-
Page 173 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
1. Click the submenu
Rule of Access Control
in the left to return to the Rule List page. Select
Enable Internet Access Control and choose "Allow the packets specified by any enabled
access control policy to pass through the Router".
2.
We recommend that you click
Setup Wizard
button to finish all the following settings.
3. Click the submenu
Host of Access Control
in the left to enter the Host List page. Add a
new entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.
4. Click the submenu
Target of Access Control
in the left to enter the Target List page. Add a
new entry with the Target Description is Target_1 and Domain Name is www.google.com.
5. Click the submenu
Schedule of Access Control
in the left to enter the Schedule List page.
Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start
Time is 1800 and Stop Time is 2000.
6. Click the submenu
Rule of Access Control
in the left, Click
Add New...
button to add a
new rule as follows:
In Rule Name field, create a name for the rule. Note that this name should be unique,
for example Rule_1.
In Host field, select Host_1.
In Target field, select Target_1.
In Schedule field, select Schedule_1.
In Status field, select Enable.
Click Save to complete the settings.
Then you will go back to the Access Control Rule Management page and see the following list.
5.11.2 Host
Choose menu “
Access Control
→
Host
”, you can view and set a Host list in the screen as
shown in Figure 5-53. The host list is necessary for the Access Control Rule.
Figure 5-53
Host Settings
Host Description -
Here displays the description of the host and this description is unique.
Information -
Here displays the information about the host. It can be IP or MAC.
Modify -
To modify or delete an existing entry.
-162-
Page 174 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
To add a new entry, please follow the steps below.
1. Click the
Add New…
button.
2. In the
Mode
field, select IP Address or MAC Address.
If you select IP Address, the screen shown is Figure 5-54.
1) In
Host Description
field, create a unique description for the host (e.g. Host_1).
2) In
LAN IP Address
field, enter the IP address.
If you select MAC Address, the screen shown is Figure 5-55.
1) In
Host Description
field, create a unique description for the host (e.g. Host_1).
2) In
MAC Address
field, enter the MAC address.
3. Click the
Save
button to complete the settings.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button return to the previous
page.
Figure 5-54
Add or Modify a Host Entry
Figure 5-55
Add or Modify a Host Entry
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA, you should first follow the settings below:
1. Click
Add New...
button in Figure 5-53 to enter the Add or Modify a Host Entry page.
2. In
Mode
field, select MAC Address from the drop-down list.
3. In
Host Description
field, create a
unique
description for the host (e.g. Host_1).
4. In
MAC Address
field, enter 00-11-22-33-44-AA.
-163-
Page 175 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
5. Click
Save
to complete the settings.
Then you will go back to the Host Settings page and see the following list.
5.11.3 Target
Choose menu “
Access Control
→
Target
”, you can view and set a Target list in the screen as
shown in Figure 5-56. The target list is necessary for the Access Control Rule.
Figure 5-56
Target Settings
Target Description -
Here displays the description about the target and this description is
unique.
Information -
The target can be IP address, port, or domain name.
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button.
2.
In
Mode
field, select IP Address or Domain Name.
If you select
IP Address
, the screen shown is Figure 5-57.
1) In
Target Description
field, create a unique description for the target (e.g.
Target_1).
2) In
IP Address
field, enter the IP address of the target.
3) Select a common service from
Common Service Port
drop-down list, so that the
Target Port
will be automatically filled. If the
Common Service Port
drop-down
list doesn’t have the service you want, specify the
Target Port
manually.
4) In
Protocol
field, select TCP, UDP, ICMP or ALL.
If you select
Domain Name
, the screen shown is Figure 5-58.
1) In
Target Description
field, create a unique description for the target (e.g.
Target_1).
2) In
Domain Name
field, enter the domain name, either the full name or the
keywords (for example google) in the blank. Any domain name with keywords in it
(
www.google.com
,
www.google.hk
) will be blocked or allowed. You can enter 4
domain names.
-164-

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top