Page 66 / 78
Scroll up to view Page 61 - 65
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
58
Figure 4-46
CWMP:
Select activate the CWMP function.
URL:
Enter the website of ACS which is provided by your ISP.
User Name/Password:
Enter the User Name and password to login the ACS server.
Path:
Enter the path that connects to the ACS server.
Port:
Enter the port that connects to the ACS server.
User Name/Password:
Enter the User Name and Password that provided the ACS server to
login the modem router.
Periodic Inform:
Activate or deactivate the function. If Activated, the information will be
informed to ACS server periodically.
Interval(s):
Enter the interval time here.
4.6
Maintenance
Choose “
Maintenance
”, you can see the next submenus:
Figure 4-47
Click any of them, and you will be able to configure the corresponding function.
Page 67 / 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
59
4.6.1 Administration
Choose “
Maintenance
→
Administration
”, you can set new password for admin in the screen
(shown in Figure 4-48).
Figure 4-48
Note:
1)
There is only one account that can access Web-Management interface. The default account
is "admin", and the password is "admin". Admin has read/write access privilege.
2)
When you change the password, you should enter the new password twice, and then click
SAVE
to make the new password take effect.
4.6.2 Time Zone
Choose “
Maintenance
→
Time Zone
”, you can configure the system time in the screen (shown in
Figure 4-49).
The system time is the time used by the device for scheduling services. There are three methods
to configure the time. You can manually set the time or connect to a NTP (Network Time Protocol)
server. If a NTP server is set, you will only need to set the time zone. If you manually set the time,
you may also set Daylight Saving dates and the system time will automatically adjust on those
dates.
1)
NTP Server automatically
Select
NTP Server automatically
as the Synchronize time, you only need to set the time zone.
Page 68 / 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
60
Figure 4-49
Note:
The ADSL modem router built-in some NTP Servers, when the modem router connects to the
Internet, the modem router will get the system time automatically from the NTP Server. You can
also configure the NTP Server address manually, and then the modem router will get the time
from the specific Server firstly.
2)
PC’s Clock
Select
PC’s Clock
as the Synchronize time, you don’t need to set any items.
Figure 4-50
3)
Manually
Select
Manually
as the Synchronize time, you need to set the date and time corresponding to the
current time.
Page 69 / 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
61
Figure 4-51
4.6.3 Firmware
Choose “
Maintenance
→
Firmware
”, you can upgrade the firmware of the modem router in the
screen (shown in Figure 4-52). Make sure the firmware or romfile you want to use is on the local
hard drive of the computer. Click
Browse
to find the local hard drive and locate the firmware or
romfile to be used for upgrade.
Figure 4-52
To upgrade the modem router 's firmware, follow these instructions below:
Step 1:
Type the path and file name of the update file into the “New Firmware Location” field. Or
click the
Browse
button to locate the update file.
Step 2:
Click the
UPGRADE
button.
Note:
1)
When you upgrade the modem router 's firmware, you may lose its current configurations,
so please back up the modem router’s current settings before you upgrade its firmware.
2)
Do not turn off the modem router or press the Reset button while the firmware is being
upgraded.
Page 70 / 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
62
3)
The modem router will reboot after the upgrading has been finished.
To back up the modem router’s current settings:
Step 1:
Click the
ROMFILE SAVE
button (shown in Figure 4-52), click
Save
button in the next
screen (shown in Figure 4-53) to proceed.
Figure 4-53
Step 2:
Save the file as the appointed file (shown in Figure 4-54).
TD-W8961N
Figure 4-54
To restore the modem router’s settings:
Step 1:
Click the
Browse
button to locate the update file for the device, or enter the exact path
in “New Romfile Location” field.
Step 2:
Click the
UPGRADE
button to complete.
19216811.live