1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-W8961N
    5. /
  5. 13
Page 61 / 78 Scroll up to view Page 56 - 60
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
53
Select the “MAC” as the Rule Type on the Filter screen (show in Figure 4-40).
, Then you can configure the specific rule for the example.
Step 2:
Select the
IP/MAC Filter Set Index
and
IP/MAC Filter Rule Index
for the rule, then
select the Interface “PVC0”, and select the Direction “Outgoing” for the first rule.
Note:
If you want to make the rule take effect, please select
Yes
to active the rule.
Step 3:
Enter the “MAC Address” and select the Unmatched rule as “Next”.
Step 4:
Finally, click the
SAVE
to save the entry.
Step 5:
Go to Step 2 to configure the next rule: Block the PC with MAC address
00:0A:EB:00:07:5F to access the Internet.
Note:
After you complete the MAC filter rules for the example, the Filter list will show as follows. You can
enter the
IP / MAC Filter Set Index
to view the information about the rule.
Other operations for the entries as shown in Figure 4-39:
Select the
IP / MAC Filter Set Index
and
IP/MAC Filter Rule Index
to view or modify the entry.
Select the
IP / MAC Filter Set Index
and
IP/MAC Filter Rule Index
to locate the specific rule,
and then click the
DELETE
button to delete the entry.
4.5.2.3 Application Filter
Select
Application Filter
as the Filter type (shown in Figure 4-41), and then you can configure
the filter rules based on application.
Page 62 / 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
54
Figure 4-41
Filter Type Selection:
Select the Application Filter for the next configuration.
Application Filter:
Activate or deactivate the function.
ICQ & MSN & YMSG & Real Audio/Video:
Select
Allow
or
Deny
for these applications.
If
you select Allow,
the modem router will accept the application; if you select Deny, the modem
router will forbid the application.
4.5.2.4 URL Filter
Select
Application Filter
as the Filter type (shown in Figure 4-42), and then you can configure
the filter rules based on URL.
Page 63 / 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
55
Figure 4-42
Filter Type Selection:
Select the URL Filter for the next configuration.
Active:
Select “Yes” to make the rule to take effect.
URL Index:
Select the index for the URL Filter entry.
URL:
Enter the URL for this URL Filter.
URL Filter Listing:
This displays the information about the URL Filter rules.
To add a URL filter entry:
For example:
If you want to forbid the user to access the website:
www.yahoo.com
. Presume the
rule is aimed at the interface PVC0, and its index is “1”.
Step 1:
Select the “URL Filter” as the Filter Type Selection (show in Figure 4-42).
Step 2:
Select the Index for the rule, and then enter the website in the URL field.
Step 3:
Finally, Select
Yes
to active the rule, and then click the
SAVE
to save the entry.
Other operations for the entries as shown in Figure 4-42:
Select the
URL Index
to view or modify the entry.
Select the
URL Index
to locate the specific rule, and then click the
DELETE
button to delete the
entry.
Page 64 / 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
56
4.5.3 SNMP
Choose “
Access Management
→
SNMP
”, you can see the SNMP screen. The Simple Network
Management Protocol (SNMP) is used for exchanging information between network devices.
Figure 4-43
Get Community:
Set the password for the incoming Get and Get next requests from the
management station.
Set Community:
Set the password for incoming Set requests from the management station.
Trap Host:
Enter the trap host here.
4.5.4 UPnP
Choose “
Access Management
→
UPnP
”, you can configure the UPnP in the screen (shown in
Figure 4-44).
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join
a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer in
use. UPnP broadcasts are only allowed on the LAN.
Figure 4-44
UPnP:
Activate or Deactivate the UPnP function. Only when the function is activated, can the
UPnP take effect.
Page 65 / 78
TD-W8961N
300Mbps Wireless N ADSL2+ Modem Router User Guide
57
Auto-configured:
If you activate the function, then the UPnP network devices can
automatically configure network addressing, announce their presence in the network to other
UPnP devices and enable exchange of simple product and service descriptions.
4.5.5 DDNS
Choose “
Access Management
→
DDNS
”, you can configure the DDNS function in the screen
(shown in Figure 4-45).
The modem router offers a Dynamic Domain Name System (
DDNS
) feature. The feature lets you
use a static host name with a dynamic IP address. User should type the host name, user name
and password assigned to your ADSL modem router by your Dynamic DNS provider.
Figure 4-45
Dynamic DNS:
Activate the DDNS function or not.
Service Provider:
This field displays the service provider of DDNS.
My Host Name:
Enter your host name here.
Username & Password:
Type the “User Name” and “Password” for your DDNS account.
4.5.6 CWMP
Choose “
Access Management
→
CWMP
”, you can configure the CWMP function in the screen
(shown in Figure 4-46).
The modem router offers CWMP feature. The function supports TR-069 protocol which collects
information, diagnoses the devices and configures the devices automatically via ACS
(Auto-Configuration Server).

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top