TD-W8950ND

150Mbps Wireless Lite N ADSL2+ Modem Router User Guide

¾

If the result displayed is similar to the Figure 3-2, it means the connection between your PC

and the Router is failed.

Figure 3-2

Failure result of Ping command

Please check the connection following these steps:

1.

Is the connection between your PC and the Router correct?

)

Note:

The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter

should be lit.

2.

Is the TCP/IP configuration for your PC correct?

)

Note:

If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of

192.168.1.2 ~ 192.168.1.254.

3.2 Quick Installation Guide

With a Web-based utility, it is easy to configure and manage the TD-W8950ND 150Mbps Wireless

Lite N ADSL2+ Modem Router. The Web-based utility can be used on any Windows, Macintosh or

UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.

1.

To access the configuration utility, open a web-browser and type in the default address

http://192.168.1.1 in the address field of the browser.

Figure 3-3

After a moment, a login window will appear, similar to the Figure 3-4. Enter admin for the User

Name and Password, both in lower case letters. Then click the OK button or press the Enter

key.

9

TD-W8950ND

150Mbps Wireless Lite N ADSL2+ Modem Router User Guide

Figure 3-4

)

Note:

1)

Do not mix up the user name and password with your ADSL account user name and password

which are needed for PPP connections.

2)

If the above screen does not pop up, it means that your Web-browser has been set to a proxy.

Go to Tools menu

→

Internet Options

→

Connections

→

LAN Settings, in the screen that appears,

cancel the Using Proxy checkbox, and click OK to finish it.

2.

After your successful login, you will see the Login screen as shown in Figure 3-5. Click Quick

Setup menu to access Quick Setup Wizard.

Figure 3-5

3.

Change the VPI or VCI values which are used to define a unique path for your connection. If

you have been given specific settings for this to configuration, type in the correct values

assigned by your ISP, and then click Next.

10

TD-W8950ND

150Mbps Wireless Lite N ADSL2+ Modem Router User Guide

Figure 3-6

4.

The Connection Type page will display. Here we select PPPoE WAN Link Type for example.

Figure 3-7

5.

Enter the Username and Password given by your ISP and click Next to continue.

11

TD-W8950ND

150Mbps Wireless Lite N ADSL2+ Modem Router User Guide

Figure 3-8

6.

The following page will display. Keep the default settings and click Next to continue.

Figure 3-9

7.

The Wireless -- Setup page will display. Click Next to continue.

Figure 3-10

12

TD-W8950ND

150Mbps Wireless Lite N ADSL2+ Modem Router User Guide

8.

You will see the Summary screen below, click Save/Reboot to save these settings.

Figure 3-11

9.

Now, your ADSL Modem Router has been configured and is rebooting. Please do not power

off the Router while it’s rebooting. After successfully rebooting, the Router will return to the

Device Info page.

Figure 3-12

)

Note:

The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface.

13