1. Home
    2. /
  2. Manuals
    3. /
  3. Tenda
    4. /
  4. W306R
    5. /
  5. 9
Page 41 / 93 Scroll up to view Page 36 - 40
11N Wireless Broadband Router
36
6.2.4 WPA- Enterprise
This security mode is used when a RADIUS server is
connected to the device. Select “WPA-Enterprise” from
the drop-down menu to enter the following window:
¾
Select SSID
：
Select the SSID (main SSID or
minor SSID) to configure security setting from the
drop-down menu.
¾
WPA Algorithms
：
Provides TKIP [Temporal Key
Integrity Protocol] or AES [Advanced Encryption
Standard]. The default is TKIP mode.
¾
Key Renewal Interval
：
Set the key’s renewal
period.
¾
Radius Server
：
Enter the IP address of the Radius
server.
¾
Radius Server port
：
Enter the authentication
Page 42 / 93
11N Wireless Broadband Router
37
port of the Radius server. The default is 1812.
¾
Shared Secret
：
Enter the shared key for
authentication server with 8~63 ASCII characters.
¾
Session Timeout
：
The authentication interval
period between AP and authentication server.
6.2.5 WPA2-Enterprise
This security mode is based on Radius authentication
server and WPA2 encryption method. WPA2 is used
when a RADIUS server is connected to the device.
Select “WPA2-Enterprise” from the drop-down menu to
enter the following window:
Page 43 / 93
11N Wireless Broadband Router
38
¾
Select SSID
：
Select the SSID (main SSID or
minor SSID) to configure security setting from the
drop-down menu.
¾
WPA Algorithms
：
Provides TKIP [Temporal Key
Integrity Protocol] or AES [Advanced Encryption
Standard]. The default is TKIP mode.
¾
Key Renewal Interval
：
Set the key’s renewal
period.
¾
Radius Server
：
Enter the IP address of the Radius
server.
¾
Radius Server port
：
Enter the authentication
port of the Radius server. The default is 1812.
¾
Shared Secret
：
Enter the shared key for
authentication server with 8~63 ASCII characters.
¾
Session Timeout
：
The authentication interval
period between AP and authentication server. The
default is 3600s.
6.2.6 802.1X
This security mode is used when a RADIUS server is
connected to the device. 802.1x, a kind of Port-based
authentication protocol, is an authentication type and
strategy for users. The port can be either a physic port
or logic port (such as VLAN). For wireless LAN users, a
port is just a channel. The final purpose of 802.11x
authentication is to check if the port can be used. If the
port is authenticated successfully, you can open this
Page 44 / 93
11N Wireless Broadband Router
39
port which allows all the messages to pass. If the port
isn’t authenticated successfully, you can keep this port
“disable” which just allows 802.1x authentication
protocol message to pass. Select “802.1x” from the
drop-down menu to enter the following window:
¾
Select SSID
：
Select the SSID (main SSID or
minor SSID) to configure security setting from the
drop-down menu.
¾
WEP
：
Click “Enable/Disable” to enable or disable
the WEP algorithm.
¾
Radius Server
：
Enter the IP address of the Radius
server.
¾
Radius Server Port
：
Enter the authentication
port of the Radius server. The default is 1812.
¾
Shared Secret
：
Enter the shared key for
authentication server with 8~63 ASCII characters.
Page 45 / 93
11N Wireless Broadband Router
40
¾
Session Timeout
：
The authentication interval
period between AP and authentication server. The
default is 3600s.
Note:
To improve security level, do not use too easy
characters. If you are not familiar with these ten
security modes, it is recommended to use
“WPA-Personal” mode.
6.3 Advanced Settings
This section is to configure the advanced wireless
setting of the Router, including the Radio Preamble,
802.11g/n Rate, Fragmentation Threshold, RTS
Threshold, etc.

Rate

3.5 / 5 based on 2 votes.

Popular Tenda Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top