Page 26 / 93
Scroll up to view Page 21 - 25
11N Wireless Broadband Router
21
Chapter 5 Advanced Settings
5.1
LAN Settings
LAN Settings are for the basic TCP/IP parameters of LAN
ports.
¾
MAC Address:
The Router’s physical MAC address
as seen on your local network, which is
unchangeable.
¾
IP Address:
The Router’s LAN IP addresses (not
value.
¾
Subnet Mask:
It’s shown the Router’s subnet
mask for measurement of the network size.
255.255.255.0 is the default value.
IMPORTANT:
Once you modify the IP address, you need to remember
it for the Web-based Utility login next time.
Page 27 / 93
11N Wireless Broadband Router
22
5.2 WAN Settings
After you have selected the ISP connection type in
“Setup Wizard” and you want to modify the related
settings, here you can modify and configure the settings
in details.
Virtual Dial-up
（
PPPoE
）
¾
Connection Mode:
Show your current connection
mode.
¾
Account:
Enter them provided by your ISP.
¾
Password:
Enter them provided by your ISP.
¾
MTU:
Maximum Transmission Unit. It is the size of
largest datagram that can be sent over a network.
Page 28 / 93
11N Wireless Broadband Router
23
The default value is 1492. Do NOT modify it unless
necessary. But if when some specific website or
web application software can not be open or
enabled, have a try to change the MTU value as
1450, 1400, etc.
¾
Service Name:
It is defined as a set of
characteristics that are applied to a PPPoE
connection. Enter it if provided. Do NOT modify it
unless necessary.
¾
AC Name:
Enter it if provided. Do NOT modify it
unless necessary.
¾
Connect Automatically:
Connect automatically
to the Internet after rebooting the system or
connection failure.
¾
Connect Manually:
Connect to the Internet by
users manually.
¾
Connect
on
Demand:
Re-establish
your
connection to the Internet after the specific time
(Max Idle Time). Zero means your Internet
connection at all time. Otherwise, enter the
minutes to be elapsed before you want to
disconnect the Internet access.
¾
Connect on Fixed Time:
Connect to the Internet
during the time you fix.
Notice:
The “Connect on Fixed Time” can be deployed only
when you have set the current time in “Time
Settings” from “System Tools”.
Page 29 / 93
11N Wireless Broadband Router
24
Static IP
If your connection mode, static IP is chosen, you can
modify the following addressing information.
¾
IP Address:
Here enter the WAN IP address
provided by your ISP.
¾
Subnet Mask:
Enter the WAN Subnet Mask
here.
¾
Gateway:
Enter the WAN Gateway here.
¾
Primary DNS Server:
Enter the Primary DNS
server provided by your ISP.
¾
Secondary DNS Server:
Enter the secondary
DNS.
Page 30 / 93
11N Wireless Broadband Router
25
5.3 MAC Address Clone
This page is for the Router’s MAC address to WAN.
Some ISPs require end-user's MAC address to access
their network. This feature copies the MAC address of
your network device to the Router.
¾
MAC Address:
The MAC address to be registered
with your Internet service provider.
¾
Clone MAC Address:
Register your PC's MAC
address.
¾
Restore Default MAC Address:
Restore to the
default hardware MAC address.
19216811.live