1. Home
    2. /
  2. Manuals
    3. /
  3. Tenda
    4. /
  4. W306R
    5. /
  5. 10
Page 46 / 93 Scroll up to view Page 41 - 45
11N Wireless Broadband Router
41
¾
BG protection Mode:
Auto by default. It is for
11b/g wireless client to connect 11n wireless
network smoothly in a complicated wireless area.
¾
Basic Data Rates:
For different requirement, you
can select one of the suitable Basic Data Rates.
Here, default value is (1-2-5.5.-11Mbps…). It is
recommended not to modify this value.
¾
Beacon Interval:
Set the beacon interval of
wireless radio. Default value is 100. It is
recommended not to modify this value.
¾
Fragment
Threshold:
The
fragmentation
threshold defines the maximum transmission
packet size in bytes. The packet will be fragmented
if the arrival is bigger than the threshold setting.
The default size is 2346 bytes. It is recommended
not to modify this value.
¾
RTS Threshold: RTS stands for “Request to Send”.
This parameter controls what size data packet the
frequency protocol issues to RTS packet. The
default value of the attribute is 2346. It is
recommended not to modify this value in SOHO
environment.
¾
TX Power:
Set the output power of wireless radio.
The default value is 100.
¾
WMM Capable:
It will enhance the data transfer
performance of multimedia data when they’re
being transferred over wireless network. It is
recommended to enable this option.
Page 47 / 93
11N Wireless Broadband Router
42
¾
APSD Capable:
It is used for auto power-saved
service. The default is disabled.
6.4 WPS Settings
WPS (Wi-Fi Protected Setting) can be easy and quick to
establish the connection between the wireless network
clients and the device through encrypted contents. The
users only enter PIN code or press WPS button on the
panel to configure it without selecting encryption
method and secret keys by manual. In the “Wireless
settings” menu, click “WPS settings” to enter the next
screen.
¾
WPS settings
：
To enable or disable WPS function.
The default is “disable”.
Page 48 / 93
11N Wireless Broadband Router
43
¾
WPS mode
：
Provide two ways: PBC (Push-Button
Configuration) and PIN code.
¾
PBC
：
Select the PBC or press the WPS button on
the front panel of the device for about one second
(Press the button for about one second and WPS
indicator will be blinking for 2 minutes, which
means the WPS is enabled. During the blinking
time, you can enable another device to implement
the WPS/PBC negotiation between them. Two
minutes later, the WPS indicator will be off, which
means the WPS connection is completed. If more
clients are added, repeat the above steps. At
present, the WPS supports up to 32 clients access.)
¾
PIN
：
If this option is enabled, you need to enter a
wireless client’s PIN code in the field and keep the
same code in the WPS client.
¾
WPS Summary
：
Show the current state of Wi-Fi
protected setting, including authorized mode,
encryption type, default key and other information.
¾
WPS Current Status
：
Idle means WPS in idle
state. Start MSC process means the process has
been started and waits for being connected.
Configured means the negotiation is successful
between server and clients.
¾
WPS Configured
：
“yes” means WPS feature is
enabled and goes into effect. “not used” means it is
not used. Usually the AP-security has been enabled,
here will displayed “not used”.
¾
WPS SSID
：
Show the main SSID set by WPS.
Page 49 / 93
11N Wireless Broadband Router
44
¾
WPS Auth. Mode
：
The authorization mode
deployed by WPS, generally WPA/WPA2-personal
mode.
¾
WPS Encrypt Type
：
The encryption type used by
WPS, generally AES/TKIP.
¾
WPS key
：
The effective key generated by AP
automatically.
¾
AP PIN
（
KEY
）：
The PIN code used by default.
¾
Reset OOB
：
When this button is pressed, the
WPS client will be idle state, and WPS indicator will
be turned off. AP will not respond the WPS client’s
requests and the set the security mode as WPA
mode.
6.5 WDS Settings
WDS (Wireless Distribution System) is used to expand
wireless coverage area. This Router provides three
modes: Lazy, Bridge and Repeater.
Page 50 / 93
11N Wireless Broadband Router
45
Lazy:
In this mode, the connected device can be Bridge
mode or Repeater mode and enter the Router’s BSSID
to establish the connection.
Bridge:
You can wirelessly connect two or more wired
networks via this mode. In this mode, you need to add
the Wireless MAC address of the connecting device into
the Router's AP MAC address table or select one from
the scanning table.
Repeater Mode
：
In this mode, add the opposing MAC
address into each own AP MAC address table by manual
or scanner to enlarge and extend the wireless radio.
Encrypt Type:
Select one from WEP, TKIP, AES for
security here.
Pass phrase:
Enter the encrypted key for wireless
devices.
AP MAC:
Input the MAC address of another (opposing)
wireless router you want to connect.
NOTE:
It is recommended that two wireless routers keep
the same bandwidth, channel number, and security
settings. Apply the settings and reboot the Router
to activate it.

Rate

3.5 / 5 based on 2 votes.

Popular Tenda Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top