Page 21 / 93
Scroll up to view Page 16 - 20
11N Wireless Broadband Router
16
ADSL Virtual Dial-up (Via PPPoE)
Enter the Account and Password provided by your ISP,
and click “Next”.
For example
：
Dynamic IP (Via DHCP)
If your connection mode is Dynamic IP, it means your IP
address keeps changing every time you connect. You do
not need to enter the information like other modes.
Click “Next” and “Save” to finish the settings.
Page 22 / 93
11N Wireless Broadband Router
17
Static IP
In this screen, fill the network address information from
your ISP in the IP Address, Subnet Mask, Gateway and
Primary DNS server fields and click “Next”.
For example
：
ISP provides the following TCP/IP parameters as
follows
：
IP Address
：
192.168.1.2
Subnet Mask
：
255.255.255.0
Gateway
：
192.168.1.1
Primary DNS Server
：
192.168.1.2
Alternate DNS Server
：
202.96.134.133
Page 23 / 93
11N Wireless Broadband Router
18
Click “Save” to complete the setup wizard. The Router
will record the settings you made. To activate the
settings, it is recommended to select “Reboot the
Router” from “System Tool” of the left menu. It is
rebooting now, please wait for a few minutes and DO
NOT power off it.
Click the “System Status” in the left menu of the
Web-based Utility to find out the current network and
system information. If the “Connection Status” is
“Connected”, Congratulations you on completing the
Router’s basic settings. You are on the Internet now. If
you want to configure more, please proceed to the
following explanations for Advanced Settings.
Page 24 / 93
11N Wireless Broadband Router
19
L2TP
L2TP Server IP:
Enter the Server IP provided by your
ISP.
User Name:
Enter L2TP username.
Password:
Enter L2TP password.
MTU:
Maximum Transmission Unit, you may need to
change it for optimal performance with your specific ISP.
1400 is the default MTU.
Address Mode:
Select “Static” if your ISP supplies you
with the IP address, subnet mask, and gateway. In most
cases, select Dynamic.
IP Address:
Enter the L2TP IP address supplied by
your ISP.
Subnet Mask:
Enter the Subnet Mask supplied by your
ISP.
Default Gateway:
Enter the Default Gateway supplied
by your ISP.
Page 25 / 93
11N Wireless Broadband Router
20
PPTP
PPTP Server IP:
Enter the Server IP provided by your
ISP.
User Name:
Enter PPTP username provided by your
ISP.
Password:
Enter PPTP password provided by your ISP.
Address Mode:
Select “Static” if your ISP supplies you
with the IP address, subnet mask, and gateway. In most
cases, select Dynamic.
IP Address:
Enter the PPTP IP address supplied by
your ISP.
Subnet Mask:
Enter the Subnet Mask supplied by your
ISP.
Default Gateway:
Enter the Default Gateway supplied
by your ISP.
19216811.live