Page 11 / 67
Scroll up to view Page 6 - 10
Wireless-N Broadband Router
Select “
Internet Protocol (TCP/IP)
” and click
“
Properties
”.
.
Select “
Obtain an IP address automatically
” and
“
Obtain DNS server address automatically
”.
Click “
OK
” to save the configurations.
6
Page 12 / 67
Wireless-N Broadband Router
Or
select “
Use the following IP address
” and
enter the IP address, Subnet mask, Default
gateway as shown right. Of course, you need to
input the DNS server address provided by your
ISP. Otherwise, you can use the Router’s default
gateway as the DNS proxy server. Click “
OK
” to
save the configurations.
How to Check the Network Connection
Select “
Start
”—
”
Programs
”—“
Accessories
”
—“
Command Prompt
”.
7
Page 13 / 67
Wireless-N Broadband Router
Input the “
” and press “
Enter
”. If
the screen displays as the right figure, it means
your PC is connected to your router successfully.
If not, please make sure the hardware installation
and
network
adapter
are
OK.
After
all
preparations are made, please proceed to
Chapter 4 for more and advanced configuration.
8
Page 14 / 67
Wireless-N Broadband Router
Chapter 4 Basic Configurations
This section is to show you how to configure your new Wireless-N Broadband Router through the
Web-based Configuration Utility.
How to Access the Web-based Configuration Utility
To access the Router’s Web-based Utility, launch
a web browser such as Internet Explorer or
Firefox and enter the Router’s default IP
address,
Enter
”.
Please input the “
admin
” in both User Name and
Password. Click “
OK
”.
9
Page 15 / 67
Wireless-N Broadband Router
Setup Wizard
Here is the “
Welcome to Setup Wizard
” for
configuring your Router quickly. Click “
Next
”.
In this screen, select one mode of your Internet
connection you use. If you are not clear, press
the “
Detect
” button or contact your Internet
Service Provider, and click “
Next
”.
Î
Connection Mode 1
: ADSL Virtual Dial-up
(Via PPPoE)
Enter the Account and Password provided by
your ISP, and click “
Next
”.
10
19216811.live