Tenda W302R Router Manual PDF (Setup & Configuration Guide)

Page 36 / 67 Scroll up to view Page 31 - 35

Wireless-N Broadband Router

WPS Settings

WPS (Wi-Fi Protected Setting)

can be easy

and quick to establish the connection between

the wireless network clients and the Router

through encrypted contents. The users only

enter the PIN code to configure without selecting

encryption method and entering secret keys by

manual.

WPS Mode:

Supports two ways to configure

WPS settings:

PBC (Push-Button Configuration) and PIN code.

PBC:

Select the PBC or press the WPS button

on the panel of the Router (Press the button for

one second and WPS indicator will be blinking

for 2 minutes, which means the WPS is enabled.

During the blinking time, you can enable another

Router to implement the WPS/PBC negotiation

between them. At present, the WPS only support

one client access. Two minutes later, the WPS

indicator will be off.).

PIN:

If this option is enabled, you need to enter

a wireless client’s PIN code in the field and keep

the same code in the client.

31

WDS Settings

Page 37 / 67

Wireless-N Broadband Router

In this mode, you can expand the scope of

network by combining up to four other access

points together, and every access point can still

accept wireless clients.

Lazy Mode:

You need configure the router’s

BSSID into another device, not need input

another router’s BSSID in it, and then connect

together automatically.

Bridge Mode:

You can wirelessly connect two or

more wired networks via this mode.

In this mode,

you need to add the Wireless MAC address of

the connecting device into the Router's AP MAC

address table or select one from the scanning

table. At the same time, the connecting device

should be in Lazy, Repeater or Bridge mode.

Repeater Mode:

You can select the mode to

extend the distance between the two WLAN

devices. Functioning as a WDS repeater, the

W302R connects to both a client card as an AP

and to another AP. In typical repeater

applications, APs connecting to other APs

equipped with WDS functionality must also

support WDS. In this mode, you need to add the

MAC address of the connecting device into the

32

Page 38 / 67

Wireless-N Broadband Router

Router's AP MAC address table and the

connecting client should be in Lazy, Repeater or

client mode.

Encrypt Type:

You can select WEP mode, TKIP

mode, AES mode for security here.

Pass phrase:

Enter the key, the key format

according to encryption you selected.

AP MAC:

Input the MAC address of another

wireless router.

NOTE

:

Two wireless routers must use the

same mode, band, channel number,

and security setting!

Advanced Wireless Settings

33

Page 39 / 67

Wireless-N Broadband Router

This section is to configure the advanced wireless

setting of the Router, including the Radio

Preamble, 802.11g/n Rate, Fragmentation

Threshold, RTS Threshold, Beacon Period and

DTIM Interval.

BG protection Mode:

Auto by default. You can

select On or Off.

Basic Data Rates:

For different requirement, you

can select one of the suitable Basic Data Rates.

Here, default value is (1-2-5.5.-11Mbps…).

Beacon Interval:

Set the beacon interval of

wireless radio. Do not modify default value if you

don’t know what it is, default value is 100.

Fragment Threshold:

Do not modify default value

if you don’t know what it is, default value is 2346.

RTS Threshold:

Set the RTS threshold of

wireless radio. Do not modify default value if you

don’t know what it is, default value is 2347.

TX Power:

You can set the output power of

wireless radio. Unless you’re using this wireless

router in a really big space, you may not have to

34

Page 40 / 67

Wireless-N Broadband Router

35

set output power to 100%. This will enhance

security (malicious / unknown users in distance will

not be able to reach your wireless router).

WMM Capable:

It will enhance the data transfer

performance of multimedia contents when they’re

being transferred over wireless network. If you

don’t know what it is / not sure if you need it, it’s

safe to set this option to ‘Enable’, however, default

value is enabling.

APSD Capable:

It is used for auto power-saved

service. The default is disabled.

Rate

Popular Tenda Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share