Page 31 / 97
Scroll up to view Page 26 - 30
11N Broadband Wireless Router
.
27
ISP, otherwise select "Static". Consult your ISP if you are not clear.
g)
IP Address:
Enter the IP address provided by your ISP. Consult your ISP if
you are not clear.
h)
Subnet mask:
Enter the subnet mask provided by your ISP.
i)
Gateway:
Enter the WAN Gateway provided by your ISP. Consult your ISP
if you are not clear.
Note:
1.
PPPOE, PPTP and L2TP cannot be used simultaneously!
2.
For PPTP and L2TP Internet connections, only Static IP or Dynamic IP is
available.
3.
Note that PPTP and L2TP may not be available on some products.
PPPoE Dual Access
PPPoE dual access only supported in special Area e.g.Russia.
1.
Internet connection Type:
Displays the current Internet connection type.
Page 32 / 97
11N Broadband Wireless Router
.
28
2.
PPPoE User Name:
Enter the User Name provided by your ISP.
3.
PPPoE Password:
Enter the password provided by your ISP.
4.
MTU:
Maximum Transmission Unit. DO NOT change it from the factory
default value unless necessary.
5.
Service Name:
Description of PPPoE connection. Leave blank unless
otherwise required.
6.
Server Name:
Description of server. Leave blank unless otherwise
required.
7.
Address Mode:
Select "Dynamic"
if you don’t get any IP info from your
ISP, otherwise select "Static". Consult your ISP if you are not clear.
8.
IP Address:
Enter the IP address provided by your ISP. Consult your ISP
if you are not clear.
9.
Subnet mask:
Enter the subnet mask provided by your ISP.
Page 33 / 97
11N Broadband Wireless Router
.
29
1.3 MAC Clone
Some Internet service providers (ISPs) require end-
user’s MAC address to
access their network. This feature copies the MAC address of your network
device to the router.
1
.
MAC Address: Configure device’s WAN MAC address.
2.
Clone MAC Address: Click to copy your PC's MAC address to the device
as a new WAN MAC address.
3.
Restore Default MAC: Reset device’s WAN MAC to factory default.
1.4 WAN Speed
Here you can set the speed and duplex mode for WAN port. It is advisable to
keep the default
Auto
setting to get the best speed.
Page 34 / 97
11N Broadband Wireless Router
.
30
1.5
LAN Settings
Click
Advanced
>
LAN Settings
to enter the screen below:
Page 35 / 97
11N Broadband Wireless Router
.
31
1.
LAN MAC Address:
Displays device's LAN MAC address, which is
NOT changeable.
2.
IP Address:
Device's LAN IP address. The default is
192.168.0.1. You can
change it according to your need.
3.
Subnet Mask:
Device’s LAN subnet mask, 255.255.255.0 by default.
4.
OK:
Click to save your settings.
Note
：
If the default IP address is changed, you must enter the new IP address to log in.
1.6 DNS Settings
DNS is short for Domain Name System or Domain Name Service.
1.
Enable Manual DNS Assignment
: Check to activate DNS settings.
2.
Primary DNS Server
：
Enter the primary DNS address provided by your
IPS.
3.
Alternate DNS Server
：
Enter the other DNS address if your ISP provides
such addresses (optional).
4.
OK:
Click to save your settings.
Note:
1. Web pages are not able to open if DNS server addresses are entered
incorrectly.
2. Do remember to reboot the device to activate new settings when you finish all
settings.
19216811.live