Page 11 / 97
Scroll up to view Page 6 - 10
11N Broadband Wireless Router
.
7
3.
Enter
admin
in the password field on the appearing login window and then
click
OK.
4
. Now you may access the device’s home page for quickly setting up Internet
connection and wireless security.
5. If you fail to log in to it, please refer to
Appendix 3 FAQs.
Page 12 / 97
11N Broadband Wireless Router
.
8
2.2 Internet Connection Setup
Common Internet connection types are available on the home page: PPPoE and
DHCP.
DHCP
Select DHCP (Dynamic IP) if you can access Internet as soon as your computer
directly connects to an Internet-enabled ADSL/Cable modem; configure a
security key (8-63 characters) to secure your wireless network and then click
OK.
PPPoE
Select PPPoE (Point to Point Protocol over Ethernet) if you used to connect to
the Internet using a broadband connection that requires a username and a
password. Enter the user name and password provided by your ISP; configure a
security key to secure your wireless network and then click OK.
Page 13 / 97
11N Broadband Wireless Router
.
9
Note:
1. DHCP is the default Internet connection type;
2. If you are not sure about your PPPoE username and password, contact your
Internet service provider (ISP) for help. For other Internet connection types,
please go to section 1.2: Internet Connection Setup.
Page 14 / 97
11N Broadband Wireless Router
.
10
3 Verify Internet Connection Settings
System automatically skips to the status page when you finish all needed settings
on the home page. Here you can see the system status and WAN connection
status of the device.
1.
If you find "
Connected
" and a WAN IP address displayed there (as shown
below), you have got a wired internet access now.
Page 15 / 97
11N Broadband Wireless Router
.
11
2.
If connection status displays "Disconnected" and there is no WAN IP
address displayed (as seen below), connection between the Internet-enabled
modem and your device may have failed. Please double check or re-connect all
involved devices and cables properly and then refresh the page. If nothing is
wrong, "Connecting" or "Connected" will be displayed.
3.
If "
Connecting
" is displayed and no WAN IP address is seen, try
refreshing the page five times. And if it still displays "
Connecting
" try steps
below:
1). Contact your ISP for assistance if you are using the DHCP connection type.
2). Read the connection diagnostic info on WAN status.
19216811.live