Page 26 / 97 Scroll up to view Page 21 - 25
11N Broadband Wireless Router
.
22
1.2
Internet Connection Setup
PPPoE
Select PPPoE (Point to Point Protocol over Ethernet) if you used to connect to
the Internet using a broadband connection that requires a username and a
password and enter the user name and password provided by your ISP.
Static IP
Select Static IP if your ISP provides all the needed info. You will need to enter
the provided IP address, subnet mask, gateway address, and DNS address(es) in
corresponding fields.
Page 27 / 97
11N Broadband Wireless Router
.
23
1.
Click
Advanced
.
2.
Click
Internet Connection Setup
.
3.
Internet connection Type: Select Static IP.
4.
IP Address: Enter the IP address provided by your ISP. Consult your ISP if
you are not clear.Consult your ISP if you are not clear.
5.
Subnet mask: Enter the subnet mask provided by your ISP.
6.
Gateway: Enter the WAN Gateway provided by your ISP.
7.
DNS Server: Enter the DNS address provided by your ISP.
8.
OK: Click it to save all your settings.
DHCP
Select
DHCP
(Dynamic IP) if you can access Internet as soon as your computer
directly connects to an Internet-enabled ADSL/Cable modem.
Page 28 / 97
11N Broadband Wireless Router
.
24
1.
Internet connection Type:
Select DHCP.
2.
MTU:
Maximum Transmission Unit. DO NOT change it from the factory
default of 1500 unless instructed by your ISP. You may need to change it for
optimal performance with some specific websites or application software
that cannot be opened or enabled; in this case, try 1450, 1400, etc.
3.
OK:
Click it to save your settings.
PPTP
Select PPTP (Point-to-Point-Tunneling Protocol) if your ISP uses a PPTP
connection. The PPTP allows you to connect a router to a VPN server.
For example
A corporate branch and headquarter can use this connection type to implement
mutual and secure access to each other’s resources.
Page 29 / 97
11N Broadband Wireless Router
.
25
a)
Internet connection Type:
Displays the current Internet connection type.
b)
PPTP Server Address:
Enter the IP address of a PPTP server.
c)
User Name:
Enter your PPTP User Name.
d)
Password:
Enter the password.
e)
MTU:
Maximum Transmission Unit. DO NOT change it from the factory
default of 1492 unless instructed by your ISP. You may need to change it for
optimal performance with some specific websites or application software
that cannot be opened or enabled; in this case, try 1450, 1400, etc.
f)
Address Mode
: Select "Dynamic" if you don’t get any IP info from your
ISP, otherwise select "Static". Consult your ISP if you are not clear.
g)
IP Address
: Enter the IP address provided by your ISP. Consult your ISP if
you are not clear.
h)
Subnet mask
: Enter the subnet mask provided by your ISP.
i)
Gateway
: Enter the WAN Gateway provided by your ISP. Consult your ISP
if you are not clear.
Page 30 / 97
11N Broadband Wireless Router
.
26
L2TP
Select L2TP (Layer 2 Tunneling Protocol) if your ISP uses an L2TP connection.
The L2TP connects your router to a L2TP server.
For Example
A corporate branch and headquarter can use this connection type to implement
mutual and secure access to each other’s resources.
a)
Internet connection Type:
Displays the current Internet connection type.
b)
L2TP Server Address
: Enter the IP address of a L2TP server.
c)
User Name
: Enter your L2TP username.
d)
Password:
Enter the password.
e)
MTU:
Maximum Transmission Unit. DO NOT change it from the factory
default of 1492 unless instructed by your ISP. You may need to change it for
optimal performance with some specific websites or application software
that cannot be opened or enabled; in this case, try 1450, 1400, etc.
f)
Address Mode:
Select "Dynamic" if you don’t get any IP info from your

Rate

3.5 / 5 based on 2 votes.

Popular Tenda Models

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top