Page 41 / 97
Scroll up to view Page 36 - 40
11N Broadband Wireless Router
.
37
Note
：
1.
With WPS successfully enabled, the WPS LED on the router keeps
blinking for about 2 minutes, and during this time, you can enable WPS on a
wireless adapter; if the adapter successfully joins the wireless network, the WPS
LED will display a solid light. Repeat steps above if you want to add more
wireless adapters to the router.
2.
Reset OOB:
Clicking this button will reset SSID to factory default and
disable security mode.
3.
Existing wireless settings will still be maintained by default after a
successful WPS connection. Namely security settings and SSID on the router
will still be the same. If you want to generate a random wireless key via WPS,
click
Reset OOB
and then follow WPS setup instructions above.
Page 42 / 97
11N Broadband Wireless Router
.
38
Note:
1.
To use the WPS security, the wireless client must be also WPS-capable.
2.
Before you press the hardware WPS button on the device for WPS/PBC
connection, making sure the WPS feature has been enabled on the device.
2.3
Wireless Extender
WISP Mode
If your router acquires Internet access from a wireless Access Point, please
select WISP mode. Specific steps are as follows:
1.
Click
Wireless
>
Wireless Extender
, select
WISP mode
and click
Open
Scan
.
Page 43 / 97
11N Broadband Wireless Router
.
39
2.
Click
Open Scan
, select the AP you wish to connect, such as Tenda-000248,
and click
OK
.
Page 44 / 97
11N Broadband Wireless Router
.
40
3.
View and note down the wireless security settings: security mode, cipher
type, security key.
Page 45 / 97
11N Broadband Wireless Router
.
41
4.
Click Close Scan and OK.
5.
Save the settings and the router will reboot automatically.
19216811.live