18

2 GUIDED INSTALLATION

DMS-CTC-20101206-0033 v1.0

5

At the end of the installation, the following screen appears:

Select

Go to the Technicolor Gateway web interface

if you want to go to the

MediaAccess Gateway GUI

after closing

the wizard. On the

MediaAccess Gateway GUI

, you can configure all services of your MediaAccess Gateway.

6

Click

Finish

.

7

The

CD menu

appears.

CD Menu

On the

CD Menu

, you can click:



Initial Setup

to connect your computer to the MediaAccess Gateway and configure your local network.



Reconfigure my Technicolor Gateway

to fully reconfigure your MediaAccess Gateway.



Setup my computer

to connect your computer to the MediaAccess Gateway network.



Documentation

to view a list of the documentation that is available for your MediaAccess Gateway.



Visit technicolor.com

to visit the online support sections.

If you reconfigure your MediaAccess Gateway via the

CD menu

, the MediaAccess Gateway will be reconfigured

from scratch. All your current settings will be lost. If you only want to make small changes to your configuration

(for example, changing the security), we recommended you to do this via the

MediaAccess Gateway GUI

. For

more information, see

“4.1 MediaAccess Gateway GUI” on page 36

.

Actual available items depend on the Setup CD delivered with your MediaAccess Gateway.

19

2 GUIDED INSTALLATION

DMS-CTC-20101206-0033 v1.0

In case of problems

If you encounter problems during this installation please refer to

“11.1 Setup Troubleshooting” on page 110

.

Backup your configuration

Once you successfully installed your MediaAccess Gateway, it is recommend to backup your configuration. This will allows

you to return to this configuration when needed (for example, after misconfiguration).

For more information, see

“4.2 Backing Up/Restoring your Configuration” on page 41

20

2 GUIDED INSTALLATION

DMS-CTC-20101206-0033 v1.0

21

3 MANUAL INSTALLATION

DMS-CTC-20101206-0033 v1.0

3

Manual Installation

Installation

This chapter will help you to manually install your MediaAccess Gateway.

Setting up your network

Proceed as follows:

1

Connect your MediaAccess Gateway to your service provider’s network.

For more information, see

“3.1 Connecting the MediaAccess Gateway to your Service Provider’s Network” on page 22

.

2

Power on the MediaAccess Gateway.

For more information, see

“3.2 Powering on the MediaAccess Gateway” on page 27

.

3

Connect your computer to the MediaAccess Gateway.

For more information, see

“3.3 Connecting Your Network Devices to the MediaAccess Gateway” on page 28

.

4

Configure your MediaAccess Gateway.

For more information, see

“3.4 Configure the MediaAccess Gateway” on page 31

.

5

Connect your phones.

For more information, see

“6 Telephony” on page 51

.

6

Share your content or media on your local network, continue with

“8 Sharing Content” on page 69

.

7

If you purchased the mobile USB adapter, setup the 3G backup connection.

For more information, see

“3.5 Setting Up the 3G Fall-Back WAN Connection” on page 32

.

8

Once you successfully installed your MediaAccess Gateway, it is recommend to backup your configuration. This will

allows you to return to this configuration when needed (for example, after misconfiguration). For more information, see

“4.2 Backing Up/Restoring your Configuration” on page 41

.

22

3 MANUAL INSTALLATION

DMS-CTC-20101206-0033 v1.0

3.1

Connecting the MediaAccess Gateway to your Service

Provider’s Network

Identifying your setup

If you are using the MediaAccess Gateway as:



DSL Gateway

, continue with

“3.1.1 Setting up your MediaAccess Gateway as DSL Gateway” on page 23

.



Local Router

, continue with

“3.1.2 Setting up your MediaAccess Gateway as Local Router” on page 26

.

For more information, see

“1.2 User Scenarios” on page 5

, you can use your MediaAccess Gateway in either of the following

scenarios