Page 71 / 84 Scroll up to view Page 66 - 70
Page
71
/
84
4.
Backup and Recovery\Factory Default
This page allows you to restore factory default settings.
To click the
Restore Defaults
button will restore System to the factory (default) settings.
Fig.2-48
System\Backup and Recovery\Factory Default
Page 72 / 84
Page
72
/
84
5.
Log\Syslog
The Syslog page allows you to specify the IP address where a Syslog server is located on the LAN side
and select different types of firewall events that may occur. Then, each time such an event occurs,
notification is automatically sent to this log server. In order to use the Syslog server, you must select
Enabled from the drop list of Remote logging, specify the IP address of server, tick the levels and then
click the
Save
button.
Fig. 2-49
System\Log\Syslog
Page 73 / 84
Page
73
/
84
6.
Log\Local Log
The gateway builds a log of firewall blocking actions that the firewall has taken. The log of levels
selected is visible on the screen. Using the Local Log page lets you tick the levels of log and show logs in
the log text frame. Tick the levels you need and click on
Save
button.
Fig. 2-50
System\Log\Local Log
Page 74 / 84
Page
74
/
84
CHAPTER 3: NETWORKING
Communications
Data communication involves the flow of packets of data from one device to another. These devices
include personal computers, Ethernet, cable modems, digital routers and switches, and highly integrated
devices that combine functions, like the Wireless Cable Gateway.
The gateway integrates the functionality often found in two separate devices into one. It’s both a cable
modem and an intelligent wireless voice gateway networking device that can provide a host of
networking features, such as NAT and firewall. Fig.3-1 illustrates this concept, with the cable modem
(CM) functionality on the left, and networking functionality on the right. In this figure, the numbered
arrows represent communication based on source and destination, as follows:
Fig.3-1 Communication between your PCs and the network side
Type of Communication
1.
Communication between the Internet and your PCs
Example: The packets created by your request for a page stored at a web site, and the contents of that
page sent to your PC.
2.
Communication between your cable company and the cable modem side
Example: When your cable modem starts up, it must initialize with the cable company, which requires
the cable company to communicate directly with the cable modem itself.
3.
Communication between your PCs and the networking side
Example: The Wireless Cable Gateway offers a number of built-in web pages which you can use to
configure its networking side; when you communicate with the networking side, your communication is
following this path.
Each packet on the Internet addressed to a PC in your home travels from the Internet
down-
stream on the cable company’s system to the WAN side of your Wireless Cable Gateway. There it
enters the Cable Modem section, which inspects the packet, and based on the results, proceeds to either
forward or block the packet from proceeding on to the Networking section. Similarly, the Networking
section then decides whether to forward or block the packet from proceeding on to your PC.
Communication from your home device to an Internet device works similarly, but in reverse, with the
packet traveling upstream on the cable system.
Page 75 / 84
Page
75
/
84
Cable Modem (CM) Section
The cable modem (or CM) section of your gateway uses DOCSIS or EURO-DOCSIS Standard cable
modem technology. DOCSIS or EURO-DOCSIS specifies that TCP/IP over Ethernet style data
communication be used between the WAN interface of your cable modem and your cable company.
A DOCSIS or EURO-DOCSIS modem, when connected to a Cable System equipped to support such
modems, performs a fully automated initialization process that requires no user intervention. Part of this
initialization configures the cable modem with a CM IP (Cable Modem Internet Protocol) address, as
shown in Figure 3-2, so the cable company can communicate directly with the CM itself.
Networking Section
The Networking section of your gateway also uses TCP/IP (Transmission Control Protocol/ Internet
Protocol) for the PCs you connected on the LAN side. TCP/IP is a networking protocol that provides
communication across interconnected networks, between computers with diverse hardware architectures
and various operating systems.
TCP/IP requires that each communicating device be configured with one or more TCP/IP stacks, as
illustrated by Fig.3-2. On a PC, you often use software that came with the PC or its network interface (if
you purchased a network interface card separately) to perform this configuration. To communicate with
the Internet, the stack must also be assigned an IP (Internet Protocol) address. 192.168.100.1 is an
example of an IP address. A TCP/IP stack can be configured to get this IP address by various means,
including a DHCP server, by you directly entering it, or sometimes by a PC generating one of its own.
Ethernet requires that each TCP/IP stack on the Wireless Cable Gateway also have associated with it an
Ethernet MAC (Media Access Control) address. MAC addresses are permanently fixed into network
devices at the time of their manufacture. 00:90:64:12:B1:91 is an example of a MAC address.
Data packets enter and exit a device through one of its network interfaces. The gateway offers Ethernet
and 802.11b/g/n wireless network interfaces on the LAN side and the DOCSIS network interface on the
WAN side.
When a packet enters a network interface, it is offered to all the TCP/IP stacks associated with the device
side from which it entered. But only one stack can accept it
a stack whose configured Ethernet address
matches the Ethernet destination address inside the packet. Further
more, at a packet’s final destination, its
destination IP address must also match the IP address of the stack.
Each packet that enters a device contains source MAC and IP addresses telling where it came from, and
destination MAC and IP addresses telling where it is going to. In addition, the packet contains all or part
of a message destined for some application that is running on the destination device. IRC used in an
Internet instant messaging program, HTTP used by a web browser, and FTP used by a file transfer
program are all examples of applications. Inside the packet, these applications are designated by their port
number. Port 80, the standard HTTP port, is an example of a port number.
The Networking section of the router performs many elegant functions by recognizing different packet
types based upon their contents, such as source and destination MAC address, IP address, and ports.
Three Networking Modes
Your gateway can be configured to provide connectivity between your cable company and your home
LAN in any one of three Networking Modes: CM, RG, and CH. This mode setting is under the control of
your cable company, who can select the mode to match the level of home networking support for which
you have subscribed. All units ship from the factory set for the RG mode, but a configuration file which
the cable company sends the cable modem section during its initialization can change it.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top