Page 66 / 84 Scroll up to view Page 61 - 65
Page
66
/
84
Fig. 2-44
USB\Media Server
Page 67 / 84
Page
67
/
84
Fig. 2-44
USB\Media Server
Page 68 / 84
Page
68
/
84
System
System Web Page Group
1.
Password
By default, the username is “
admin
and the password is “
admin
”.
This is set by different actions (non exhaustive list):
-
at the manufactory level,
-
following a reset factory on the modem,
-
following a reset from the operator,
-
following a change by the user who wants to come back to the default setting after using its own
settings
When the current password is the default one, the user is strongly encouraged to change the default web
password.
At your first connection or while the password is the default one, a warning message is displayed on the
top banner of each Web configuration page. We want to encourage you to change the password in order
to enforce the security of your modem.
The password can be a maximum of 8 characters and is case sensitive. In addition, this page can be used
to restore the gateway to its original factory settings. Use this with caution, as all the settings you have
made will be lost. To perform this reset, set
Restore Factory Defaults
to
Yes
and click
Apply
. This has
the same effect as a factory reset using the rear panel reset switch, where you hold on the switch for 5
seconds, then release it.
Note: We are always suggesting you to modify the password. This is a basic protection against wrongful
access to the Gateway Web pages.
Fig.2-45 System\Password
Page 69 / 84
Page
69
/
84
2.
Backup and Recovery\Backup
This page allows you to save your current settings locally on your PC. The default file name is
GatewaySettings.bin
.
Please enter the password if you want to encrypt your configuration
s backup. The same password MUST
be entered to retype password field for the confirmation. Click the
Backup
button for saving the
configuration
s backup.
Fig. 2-46 System\
Backup and Recovery\Backup
Page 70 / 84
Page
70
/
84
3.
Backup and Recovery\Restore
This page allows you to restore settings previously saved locally on your PC. The default file name is
GatewaySettings.bin
.
Please enter the password if you want to restore encrypted configuration
s backup. Click
Browse
button
and then select the configuration
s backup that you want to restore. Click the
Restore
button for
restoring the configuration
s backup.
Fig. 2-47
System\Backup and Recovery\Restore

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top