Page 66 / 88
Scroll up to view Page 61 - 65
SonicWALL Installation Guide Page 65
Extended
Warranty
Authentication
Service - Admin
Authentication
Service - Client
High Availability
ViewPoint
Anti-Virus
Upgrade
Firmware
download
Support 8X5
Support 24X7
(US only)
Int’l Support
Available Services on SonicWALL Appliances
Services
SOHO3,
TELE3, &
PRO100
PRO 200
PRO 300
GX 2500
GX 6500
Page 67 / 88
Page 66
Activating Services Using mySonicWALL.com
To activate a service such as
Content Filter
, use the following steps:
1.
Log into mySonicWALL.com using your username and password. Select the appliance
to be upgraded with the
Content Filter List
subscription, and click the name.
2.
Click
Activate
next to
Content Filter
. The following screen appears with an
Activation Key
field, and a
Terms and Conditions
message.
3.
Type the
Activation Key
into the
Activation Key
field, and select
I have read and
agreed
to all of the above terms and conditions. Click
Submit
.
4.
The
Content Filter List
subscription is now active, and you can download the
Content Filter List
through your SonicWALL appliance.
Note:
The Anti-Virus service also needs to be activated on your SonicWALL appliance.See
the Anti-Virus User’s Guide for more information.
Page 68 / 88
SonicWALL Installation Guide Page 67
4
Hardware Description
This chapter provides detailed illustrations and descriptions of the SonicWALL Internet Security
Appliances front and back panels by model. Refer to this chapter to learn the location of LEDs,
switches, and connectors.
SonicWALL PRO 200 and PRO 300 Front Panel
The SonicWALL PRO 200 front panel is shown below, followed by a description of each item.
The SonicWALL PRO 300 is identical to the SonicWALL PRO 200 except for the PRO 300 label
on the front panel and has 64MB of RAM.
SonicWALL PRO 200 and SonicWALL PRO 300 Front Panel Description
•
Power
Lights up when power is applied to SonicWALL PRO or SonicWALL PRO 300.
•
Test
Lights up when the SonicWALL is powered up and performing diagnostic tests to check for
proper operation. These tests take about 90 seconds. If the Test LED remains lit after this
time, the software is corrupt and must be reinstalled.
•
Alarm
Lights up and flashes for 10 seconds when an event generates an alert.
Alarm
LED flashes
for 10 seconds. Alert events are defined in the
Log Settings
section in Chapter 5 of the
SonicWALL Internet Security Appliance User’s Guide.
Power, Test, and
Alarm LEDs
WAN Port LEDs
Link, Activity
DMZ Port LEDs
Link, Activity
LAN Port LEDs
Link, Activity
Page 69 / 88
Page 68
There are three Ethernet ports; one for each of the LAN, DMZ, and WAN ports:
•
Link
Lights up when a
Twisted Pair
connection is made to another Ethernet device (usually a
hub) on the port. Note that the device connected to the SonicWALL must support the
standard Link Integrity test.
•
Activity
Lights up when the SonicWALL transmits or receives a packet through the Twisted Pair port
onto the network.
SonicWALL PRO 200 and PRO 300 Back Panel
The SonicWALL PRO 200 back panel is shown below, followed by a description of each item.
The SonicWALL PRO 300 back panel is identical to the SonicWALL PRO 200.
SonicWALL PRO 200 and SonicWALL PRO 300 Back Panel Description
•
(3) Twisted Pair (10Base-T, 100Base-T) Ethernet Ports
(3) Auto switching 10Mbps/100Mbps Ethernet ports provide connectivity for both Ethernet
and Fast Ethernet networks. The Ethernet ports connect the SonicWALL to the LAN, DMZ,
and WAN using Twisted Pair cable with RJ45 connectors.
•
Serial
DB-9 RS-232 Serial port
•
Reset Switch
Resets the SonicWALL PRO 200 or the SonicWALL PRO 300 to its factory clean state. This
can be required if you forget the administrator password, or the SonicWALL firmware has
become corrupt.
Cooling
Vents
10Mbps/100Mbps
LAN Ethernet Port
10Mbps/100Mbps
DMZ Ethernet Port
10Mbps/100Mbps
WAN Ethernet Port
RS-232
Serial Port
Reset
Switch
5VDC, 2A
Power Input
Page 70 / 88
SonicWALL Installation Guide Page 69
•
Power Input
Connects the SonicWALL to power input. The use of an Uninterruptible Power Supply (UPS)
is strongly recommended to protect the SonicWALL against damage, or loss of data due to
electrical storms, power failures, or power surges.
•
Power Switch
Powers the SonicWALL on and off.
•
Cooling Vents
The SonicWALL is convection cooled; an internal fan is not necessary. Do not block the
cooling vents on the SonicWALL side panels.
SonicWALL PRO 100 Front Panel
The SonicWALL PRO 100 front panel is shown below, followed by a description of each item.
SonicWALL PRO 100 Front Panel Description
•
Power
Lights up when power is applied to the SonicWALL PRO 100.
•
Test
Lights up when the SonicWALL PRO 100 is first powered up and performing diagnostic tests
to check for proper operation. These tests take about 90 seconds. If the
Test LED
remains
lit after this time, the software is corrupt and must be reinstalled.
Power LED
WAN Port LEDs
Link, 100, Activity
DMZ Port LEDs
Link, 100, Activity
LAN Port LEDs
Link, 100, Activity
Test LED
19216811.live