Page 111 / 139
Scroll up to view Page 106 - 110
100
Using the USB2.0 Multi-function Print
Server
Introduction
The SMCWGBR14-N Multi-Functional (MFP) Print Server allows networked PCs to access
and share the networked printer or All-In-One printer using the USB port on your
SMCWGBR14-N.
For supported MFP devices, both printing and scanning features can be accessed from any
PC on the network.
This MFP Print Server was designed to use a web based
Printer Setup Wizard
that makes
network printer installation easy.
System Setup
To use the MFP print server, first use the
SMCWGBR14-N
instructions for the basic setup of
your network.
Next, run the
Printer Setup Wizard
to install the correct printer driver onto your PC(s) and
configure for network printing.
Page 112 / 139
101
Printer Wizard
The Print Server provides a
Printer Setup Wizard
that makes this process
extremely simple to set up the PC for network printing.
From the
SMCWGBR14-N
home page (LOGIN page), select the Printer Icon to
start the installation of your printer.
Review the 3 simple steps, and press
Next
.
Page 113 / 139
102
Step
1
of the
Printer Setup Wizard
requires you to verify the printer to
install.
Press
Next
to install this printer.
Note:
the printer must be powered on to be visible in this setup page.
Step
2
is to launch the
Printer Setup Wizard
application.
This
application executes on your PC, finds and loads the correct print driver
and then configures the driver for network printing.
If the printer driver has been loaded onto the PC before, the wizard will
find it.
If this printer is new to this PC, you may be asked to place the
printer CD that came with the printer into the CD drive of the PC.
Alternatively, one can download the printer driver from the printer
manufacturer’s web site prior to running the wizard.
Press
Next
to
launch the install
Printer Setup Wizard
application.
Page 114 / 139
103
Since the
Print Setup Wizard
application runs on the PC, the Security
Warning popup boxes shown below will be displayed.
Select
RUN
in
both instances.
The Wizard will execute showing progress with the following popup.
Once the printer driver is installed, the
Printer Setup Wizard
will ask if
you would like to make this printer the default printer.
The default printer
can be changed at anytime through the Windows Control Panel for
Printers and Faxes.
Page 115 / 139
104
The
Printer Setup Wizard
application also creates a shortcut to the
SMCWGBR14-N
web page on your PC desktop.
This shortcut can be
used to quickly access the
SMCWGBR14-N
web page in the future,
especially to use the scan function on the MFP.
Finally, the
Printer Setup Wizard
application will ask if you would like to
print a test page.
This is helpful to ensure everything is set up and
working properly.
Press the
Finish
button to conclude the
Printer Setup Wizard
.
19216811.live