1. Home
    2. /
  2. Manuals
    3. /
  3. SmartRG
    4. /
  4. SR360n EarthLink
    5. /
  5. 18
Page 86 / 117 Scroll up to view Page 81 - 85
Page 86
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Manual Setup
Network Authentication: 802.1X
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
RADIUS Server IP address
Enter the IP address for the Remote Authentication Dial In User Service server as-
sociated with your infrastructure.
RADIUS Port
Port 1812 for authentication is a standard for RADIUS authentication per the IETF
RFC 2865. Your RADIUS deployment may differ from this. Older servers may use port
1645.
RADIUS Key
(Optional)
Enter the encryption key (if required) to authenticate to the RADIUS Server specified
via the Server IP address above.
WEP Encryption
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
Current Network Key
[1-4] Select which of the four keys from the list is presently in effect.
Network Key 1-4
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
Page 87 / 117
Page 87
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Manual Setup
Network Authentication: WPA
WPA Authentication requires the same set of parameters as used with 802.1X with but with the two parameters added:
WPA
Group Rekey Interval
and
WEP Encryption
. Reference the above table for field descriptions not found in the table for WPA below.
The individual fields on this screen are defined as follows:
Field Name
Description
WPA Group Rekey Interval
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
WPA/WAPI Encryption
[AES, TKIP+AES]
Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu
-
lated with the option most complimentary to the Network Authentication selected.
Page 88 / 117
Page 88
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Manual Setup
Network Authentication: WPA-PSK
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
WPA/WAPI passphrase
Enter the desired security password to be used by this security configuration.
Use base MAC address as WAP/WAPI
Passphrase
In lieu of manually entering a password, allow the Base MAC address to be substi-
tuted for the password.
When this box is checked, any content in the WPA/WAPI
passphrase field will be ignored.
WPA Group Rekey Interval
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
WPA/WAPI Encryption
[AES, TKIP+AES]
Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu
-
lated with the option most complimentary to the Network Authentication selected.
WEP Encryption
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
Current Network Key
[1-4] Select which of the four keys from the list is presently in effect.
Network Key 1-4
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
Page 89 / 117
Page 89
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Manual Setup
Network Authentication: WPA2
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
WPA2 Preauthentication
Network Re-Auth Interval
WPA Group Rekey Interval
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
RADIUS Server IP address
Enter the IP address for the Remote Authentication Dial In User Service server as-
sociated with your infrastructure.
RADIUS Port
[1-65535] Port 1812 for authentication is a standard for RADIUS authentication per
the IETF RFC 2865. Your RADIUS deployment may differ from this. Older servers may
use port 1645.
RADIUS Key
Enter the encryption key required to authenticate to the Radius Server specified via
the Server IP address above.
WPA/WAPI Encryption
[AES, TKIP+AES]
Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu
-
lated with the option most complimentary to the Network Authentication selected.
WEP Encryption
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
Page 90 / 117
Page 90
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Field Name
Description
Current Network Key
[1-4] Select which of the four keys from the list is presently in effect.
Network Key 1-4
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
WPA/WAPI passphrase
Enter the desired security password to be used by this security configuration.
Use base MAC address as WAP/WAPI
Passphrase
In lieu of manually entering a password, allow the Base MAC address to be substi-
tuted for the password.
When this box is checked, any content in the WPA/WAPI
passphrase field will be ignored.
WPA Group Rekey Interval
[1-65535 seconds] The frequency with which the gateway automatically updates the
group key and sends it to connected LAN client devices.
WPA/WAPI Encryption
[AES, TKIP+AES]
Choose from Advanced Encryption Standard (AES) or AES com-
bined with Temporary Key Integrity Protocol (TKIP). This field has been pre-popu
-
lated with the option most complimentary to the Network Authentication selected.
WEP Encryption
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
Current Network Key
[1-4] Select which of the four keys from the list is presently in effect.
Network Key 1-4
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).
Manual Setup
Network Authentication: WPA2-PSK

Rate

4.5 / 5 based on 2 votes.

Popular SmartRG Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top