1. Home
    2. /
  2. Manuals
    3. /
  3. SmartRG
    4. /
  4. SR360n EarthLink
    5. /
  5. 22
Page 106 / 117 Scroll up to view Page 101 - 105
Page 106
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
The individual fields on this screen are defined as follows:
Action
Description
View
This button will display the Security Log on the screen.
Reset
This button will purge all stored data from the Security Log.
Management Server
Management Server refers to an Auto Configuration Server such as Cisco Prime Home which offers significant advantages in
terms of automation and productivity when managing subscriber devices in the field.
TR-069 Client
SmartRG gateways support TR-069 based standards for remote management.
Utilize this screen to configure the gateway with
details about the management ACS (Auto Configuration Server) to which this gateway will be linked.
Select
Management -> Management Server -> TR-069 Management
from the left navigation bar. The screen pictured below will
appear. Update or complete the necessary fields per the instructions from your ACS platform vendor.
Click
Apply/Save
to commit your changes.
Upon selecting
Management -> Settings -> Security Log
from the left navigation bar, the following screen will appear.
Page 107 / 117
Page 107
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
The individual fields on this screen are defined as follows:
Field Name
Description
OUI-Serial
Select whether to use the base MAC address or the serial number of your gateway
when connecting to the ACS.
TR-069 Client
Disable/Enable TR-069 client on the CPE.
Inform Interval
The frequency (in seconds) with which the CPE (gateway) checks in with the ACS to
sync and exchange data. A typical production environment entails CPEs in the field
informing to the ACS once/day or every 86,400 seconds.
ACS URL
URL for the CPE to connect to the ACS using the CPE WAN Management Protocol.
This parameter MUST be in the form of a valid HTTP or HTTPS URL. An HTTPS URL
indicates that the ACS supports SSL. The “host” portion of this URL is used by the
CPE for validating the certificate from the ACS when using certificate-based authen
-
tication.
ACS User Name
User name by which this gateway logs in to the ACS.
ACS Password
Password to authenticate the above user name.
WAN Interface used by TR-069 client
Choose any WAN, LAN, Loop back or a configured connection to declare how this
gateway will connect to the ACS.
Connection Request Authentication
Check this checkbox if your ACS requires authenticated connection requests. Com-
plete the additional credential fields that are exposed.
Use the GetRPCMethods buttons to force the gateway to attempt to sync with the ACS. This will assist you in verifying the TR-069
parameters entered above.
Page 108 / 117
Page 108
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
STUN Config
STUN:
Stands for “Simple Traversal of UDP through NATs”. STUN enables a device to find out its public IP address and the type of NAT
service it is sitting behind.
STUN Server:
An entity that receives STUN requests and sends STUN responses. STUN servers are generally attached to the public Internet.
When a STUN server is present within the infrastructure of the Service Provider, utilize this screen to configure this gateway with
the connectivity specifics for that server.
After selecting
Management -> Management Server -> STUN Config,
check the
STUN Server Support
button to expose the required
STUN settings. Complete each field in accordance with the implementation specifics of server.
Click the
Save/Apply
button to commit your changes.
Page 109 / 117
Page 109
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Internet Time
Sync the clock in your gateway with reliable external clocking servers available on the internet.
After selecting
Management -> Internet Time
you may check the checkbox on the first line to enable the Network Time Protocol.
You may select or input your own NTP servers.
Select the desired time zone for the gateway.
Click
Apply/Save
to commit your settings.
Page 110 / 117
Page 110
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Access Control
Services
Utilize this screen to establish a Service Control List. You many control which services (FTP, HTTP, Telnet, etc.) are to be restricted
on the LAN
After selecting
Management -> Access Control -> Services
you may modify settings as desired.
Click
Apply/Save
to commit your settings.

Rate

4.5 / 5 based on 2 votes.

Popular SmartRG Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top