1. Home
    2. /
  2. Manuals
    3. /
  3. SmartRG
    4. /
  4. SR360n EarthLink
    5. /
  5. 17
Page 81 / 117 Scroll up to view Page 76 - 80
Page 81
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
WIRELESS
Basic
This page allows you to configure basic features of the Wi-Fi LAN interface. You can enable or disable the Wi-Fi LAN interface, hide
the network from active scans, set the Wi-Fi network name (also known as SSID) and restrict the channel set based on country
requirements.
After selecting
Wireless -> Basic
from the left navigation bar you may modify settings as desired.
Click
Apply/Save
to commit your settings.
Page 82 / 117
Page 82
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
The individual fields on this screen are defined as follows:
Field Name
Description
Enable Wireless
Check to enable the gateway’s Wi-Fi radio.
Enable Wireless Hotspot2.0
Check to enable wireless Hotspot2.0. (WPA2 is required!)
Hotspot 2.0 is focused on enabling a mobile device to automatically “discover” Wi-Fi
access points that have a roaming arrangement with the user’s home network and
then securely connect.
Hide Access Point
Check to Hide Access Point SSID.
Client Isolation
Check to prevent LAN client devices from communicating with one another on the
wireless network.
Disable WMM Advertise
Check to stop the wireless from advertising Wireless Multimedia (WMM) functional-
ity. WMM provides basic Quality of Service (QOS) for applications.
Enable Wireless Multicast Forwarding
Check to enable Wireless Multicast Forwarding (WMF). Forwards multicast traffic
across wireless clients when enabled.
SSID
Enter the the Wi-Fi Service Set Identifier (SSID) here.
BSSID
Enter the Basic Service Set Identifier (BSSID). Provides the MAC address assigned
to the wireless router.
Country
Set the country in which the gateway is deployed.
Max Clients
[1-16] Define the maximum number of clients that can access the router wirelessly.
If desired, up to three virtual acces points for guest use may be defined.
Enabled
Check to Enable a virtual wireless access point for guest access.
SSID
Enter your desired wireless Service Set Identifier (SSID) here.
Hidden
Check this option to hide the SSID from being broadcasted publicly.
Isolate Clients
Check to prevent client PC’s from communicating with one another.
Disable WMM Advertise
Check to stop the wireless from advertising Wireless Multimedia (WMM) functionality.
Enable WMF
Check to enable Wireless Multicast Forwarding (WMF).
Enable HSPOT
Check to enable wireless Hotspot2.0
BSSID
N/A
Page 83 / 117
Page 83
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Security
Utilize this screen to configure security features of the wireless LAN interface.
You may configuration it manually or via Wi-Fi Protected Setup (WPS).
After selecting
Wireless -> Security
from the left navigation bar you may modify settings as desired.
Click
Apply/Save
to commit your settings.
Note: When both
STA PIN
and
Authorized MAC
are empty,
PBC
becomes the default value.
If
Hide Access Point
is enabled or the MAC filter list is empty with “allow” chosen, WPS2 will be disabled.
Page 84 / 117
Page 84
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
The individual fields on this screen are defined as follows:
Field Name
Description
Enable WPS
[Enabled, Disabled] Enables Wi-Fi Protected Setup.
Enter STA PIN
Use AP PIN
Select the method [STA PIN, AP PIN] for how the WPS PIN is generated. Select the
desired radio button then click the “Add Enrollee” if necessary to add a specific, en
-
rollee station.
If both the PIN field and Set Authorized Station MAC are left blank, the PBC (push-
button) mode is automatically made active.
Set Authorized Station MAC
When manually pairing via WPS, enter the MAC address of the client device you are
trying to connect.
Set WPS AP Mode
[Configured, Unconfigured] Select Configured to have the gateway assign security
settings to clients. Select Unconfigured when you wish to have an external client as
-
sign security settings to your SmartRG gateway.
Device PIN
(Auto generated by the access point.)
Network Authentication
Select the desired network security authentication type.
Note that many of the fields in the Manual Setup portion of the screen vary based on the choice of Network Authentication.
Each variation is presented below.
Page 85 / 117
Page 85
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Manual Setup
Network Authentication: Open and Shared
The same configuration fields apply for
Manual Setup
of both
Shared
and
Open
authentication types.
WPS however may not be
used under
Shared
.
The individual fields on this screen are defined as follows:
Field Name
Description
Select SSID
Select the SSID from the drop-down list for the wireless network to which this secu-
rity configuration will apply.
WEP Encryption
[Enabled, Disabled] Select Enabled to turn on Wired Equivalent Privacy mode.
Encryption Strength
[128 bit, 64 bit] Select the length of the encryption method. 128 bit being the more
robust option for security.
Current Network Key
[1-4] Select which of the four keys from the list is presently in effect.
Network Key 1-4
Enter up to four encryption keys using the on-screen instructions to achieve the de-
sired security strength (128 or 64 bit).

Rate

4.5 / 5 based on 2 votes.

Popular SmartRG Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top