Page 61 / 117 Scroll up to view Page 56 - 60
Page 61
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
DNS
DNS Server
Use the features of this screen to input the Domain Name Server information supplied by the service provider.
After selecting
Advanced Setup -> DNS -> DNS
Server from the left navigation bar, the following screen will appear. Enter your
desired settings. Click
Apply/Save
to commit changes.
Page 62 / 117
Page 62
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Field Name
Description
Selected DNS Server Interfaces
The WAN service selected to be your primary DNS server.
Available Wan Interfaces
WAN services available to be selected for the DNS server.
Primary DNS Server
Enter the IP address of the primary DNS server.
Secondary DNS Server
Enter the IP address of the secondary DNS server.
WAN Interface Selected
Alter this field only if IPv6 environment.
Primary IPv6 DNS Server
Enter the IP address of the primary IPv6 primary DNS.
Secondary IPv6 DNS Server
Enter the IP address of the primary IPv6 primary DNS.
The individual fields on this screen are defined as follows:
Dynamic DNS
Dynamic DNS (DDNS) automatically updates a name server in the DNS with the active DNS configuration of its configured host
-
names, addresses or other data. Often this update occurs in real time.
After selecting
Advanced Setup -> DNS -> Dynamic DNS
from the left navigation bar, click the
Add
button. The following screen
will appear.
Enter your desired settings then click
Apply/Save
to commit your changes.
Page 63 / 117
Page 63
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Field Name
Description
D-DNS provider
Select a dynamic Domain Name Server provider from the drop-down menu.
Hostname
Enter the name of the dynamic DNS server.
Interface
Select the gateway WAN interface whose traffic will be pointed at the above specified
Dynamic DNS provider
Username
Enter the username of the dynamic DNS server
Password
Enter the password of the dynamic DNS server
The individual fields on this screen are defined as follows:
Static DNS
The Static DNS service allows you to resolve DNS queries on the Broadband Router by adding static Host Name to IP Address
mappings.
After selecting
Advanced Setup -> DNS -> Static DNS
from the left navigation bar, click the
Add
button. The following screen will
appear. Enter your desired settings then click
Apply/Save
to commit your changes.
A maximum of 10 static DNS entries can be added.
Field Name
Description
Hostname
Enter the hostname of the client computer.
Interface
Enter the IP address of the DNS server client uses to assist in resolving domain names.
The individual fields on this screen are defined as follows:
Page 64 / 117
Page 64
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
DSL
Advanced settings for the DSL interface.
CAUTION
: Altering these settings unnecessarily could result in the gateway being unable to attain DSL synchronization.
After selecting
Advanced Setup ->DSL
from the left navigation bar, click the
Add
button. The following screen will appear. Enter
your desired settings then click
Apply/Save
to commit your changes.
Page 65 / 117
Page 65
501 SE Columbia Shores Boulevard, Suite 500, Vancouver, Washington 98661, USA
l
+1 360 859 1780
SmartRG Inc. Propriety and Confidential. All Rights Reserved. Copyright © 2014
smartrg.com
Modulation
Data Transmission Rate
G.Dmt
ITU-T G.992.1 standard.
Max Downstream: 12 Mbps
Max Upstream: 1.3 Mbps
G.lite
ITU-T
G.991.2 standard.
Max Downstream: 4 Mbps
Max Upstream: 0.5 Mbps
T1.413
ANSI T1.413 Issue 2 standard.
Max Downstream: 8 Mbps
Max Upstream: 1.0 Mbps
ADSL2
ITU-T G.992.3 standard.
Max Downstream: 12 Mbps
Max Upstream: 1.0 Mbps
AnnexL
Annex L of ITU-T G.992.3 standard which supports longer loops but with reduced trans-
mission rates.
ADSL2+
ITU-T G.992.5 standard.
Max Downstream: 28 Mbps
Max Upstream: 1.0 Mbps
AnnexM
Annex L of ITU-T G.992.5 standard which supports extended upstream bandwidth.
Max Downstream: 24 Mbps
Max Upstream: 3 Mbps
VDSL2
ITU-T G.993.2 standard.
Max Downstream: 100 Mbps
Max Upstream: 60 Mbps
Parameter
8a
8b
8c
8d
12a
12b
17a
Max DS Tx Power (dBm)
+17.5
+20.5
+11.5
+14.5
Max US Tx Power (dBm)
+14.5
Min bidirectional net data rate
50Mbps
68Mbps
100Mbps
The individual fields on this screen are defined as follows:
Other Settings
Field Name
Description
Inner Pair/Outer Pair
The RJ11 connector has four contacts. The center pair of pins is DSL1. The outer pair
pins are the contacts for DSL2. Select which pair should be used.
Bitswap Enable
Enables adaptive handshaking functionality
SRA Enable
Enables Seamless Rate Adaptation
From the
DSL Advanced Settings
screen you may select the test mode and apply a tone selection.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top