Page 121 / 180
Scroll up to view Page 116 - 120
Settings
113
Settings
Section 5L
Logs
²
Available Logs (page 113)
²
Connection History (page 113)
²
System Events (page 114)
²
Setting the Method Used for Time Acquisition (page 115)
Available Logs
The following types of logs are available:
●
Connects and disconnects. (See the following section.)
●
System events. (See “System Events” on page 114.)
Connection History
The connection history shows the time of connections to and disconnections from the Internet.
Note:
The connection history does not log the amount of data transferred. In the Internet Connection
Information window, you can view information on the current billing cycle and lifetime of the device.
(See “Internet Connection Information” on page 49.)
Enabling and Disabling Logging of Connects and Disconnects
1.
Log in to the home page.
2.
Click
Advanced settings > Device > Log
.
3.
In the
Connect/Disconnect
section, select
Enable
or
Disable
.
4.
Click
Save
.
Exporting the Connection History
1.
Log in to the home page.
2.
Click
Advanced settings > Device > Log
.
3.
Make sure
Connect/Disconnect
is set to
Enable
.
4.
Click
Export
.
Clearing the Connection History
1.
Log in to the home page.
2.
Click
Advanced settings > Device > Log
.
3.
In the
Connect/disconnect
section, click
Clear log
.
Page 122 / 180
114
Settings
System Events
You can enable or disable, as a group, the logging of the following events:
●
Software update available
●
Network update available
●
Primary WAN failover
●
Primary WAN switchback
●
Unexpected data connection loss
●
Changes to miscellaneous settings
The following system events are always logged:
●
Intrusion alerts
●
Unexpected power loss
●
Critical battery
●
Critical temperature
●
Routing hardware settings reset
●
Firmware update
Enabling and Disabling Logging of System Events
1.
Log in to the home page.
2.
Click
Advanced settings > Device > Log
.
3.
In the
Verbose System Event Logging
section, select
Enable
or
Disable
.
4.
Click
Save
.
Note:
Certain events are always logged. (See “System Events” [above].)
Exporting System Events
1.
Log in to the home page.
2.
Click
Advanced settings > Device > Log
.
3.
Make sure
Verbose System Event Logging
is set to
Enable
.
4.
Click
Export
.
Clearing the System Events Log
1.
Log in to the home page.
2.
Click
Advanced settings > Device > Log
.
3.
Make sure
Verbose System Event Logging
is set to
Enable
.
4.
Click
Clear log
.
Page 123 / 180
Settings
115
Settings
Setting the Method Used for Time Acquisition
Time information is stored in the connection history log and system events log.
To set the method used for obtaining the time:
1.
Log in to the home page.
2.
Click
Advanced settings > Device > Log
.
3.
Select the
3G
or the
NTP
check box.
±
3G
— Time information is obtained from the 3G (CDMA) network; this is more accurate than
NTP, but requires 3G coverage.
±
NTP
— The device’s clock is synchronized to a Network Time Protocol server on the
Internet; not as accurate as when using the
3G
setting, but doesn’t require 3G coverage.
Use this setting if you have 4G but no 3G coverage.
Page 124 / 180
116
Settings
Section 5M
Setup Pages
²
Welcome to Your Device Window - Select an Option (page 116)
Welcome to Your Device Window - Select an Option
The Welcome to Your Overdrive Pro window opens:
●
Automatically, as part of the initial setup of your newly purchased device.
●
When you click
Admin Setup
(
) from the home page, make changes (if applicable) and then
click
Submit
(you must be logged in).
Note:
This window displays the administrator password and the address of the device home page. Please
remember this information or write it down in a safe place.
This window provides several options.
●
To keep the default settings of the device, select one of the following:
±
The Internet
— This connects you immediately to the Internet.
±
My Overdrive Pro’s home page
— From the home page you can view the device status and
customize settings.
●
To change security settings, select
Set up my Overdrive Pro
.
19216811.live