1. Home
    2. /
  2. Manuals
    3. /
  3. Siemens
    4. /
  4. SL2-141
    5. /
  5. 25
Page 121 / 144 Scroll up to view Page 116 - 120
Chapter 5:Connection Mode
Access Controls
The web page allows you to enable the wireless MAC control configuration.
Access Control:
Click
Off
to disable this function. Click
On
in
Allow mode
to make any wireless MAC
address can be linked to. And click
On in
Deny mode
to disturb any wireless MAC
address to be linked to.
View Access Control List:
Click this button to view the wireless access
control list and to add a new access control.
The Wireless Access Control List dialog
allows you to add a new MAC address and
view current MAC address that you had
added.
To add a new MAC address to your wireless
MAC address filters, click on the
Add
button from the Wireless Access Control List
dialog to show next page.
MAC Address of Wireless:
You have to type in the MAC Address that
you want it to be linked to your router. And
click
Apply
.
The result of adding a new MAC address
will be shown the example as the right
picture.
If you want to delete the added MAC
address, simple click the delete button (like a
trash can), a dialog box will be shown to ask
you. Click
Yes
, then the new one will be
erased.
113
Page 122 / 144
ADSL Router User Manual
Repeater
The web page allows you to configure the wireless distribution system for the wireless network.
AP Mode:
Choose either one of the selection as the AP
mode.
Search Other Repeaters:
Click the
Scan Now
button to scan search
other repeater in the wireless network. The
result will be shown under below.
Click
Apply
to invoke the wireless repeater
options.
If you click
Manual
as the Search Other
Repeaters, you will need to type the MAC
address for wireless repeaters in the boxes of
MAC Address of Remote Wireless
Repeaters.
The right picture shows an example of
executing the function of wireless repeater.
When you finish settings, please click
Apply
to invoke them actually.
114
Page 123 / 144
Chapter 5:Connection Mode
Management
Diagnostics
To check the link status for the network and your computer, a diagnostic test can guide you to detect
the network problem. The testing items are listed and accomplished one by one. If the previous one
is failed, than the items below that failed one will be failed too. Use this diagnostic test to detect the
connectivity mistakes whenever you happen to the linked problem.
For the item which passes through the
diagnostics, a PASS word will be shown on
the right side of that item.
If not, a Fail word will be there.
N/A means that item is not necessary for the
system to test.
The Help link lets you know what the result
(Pass, Down, Fail) represents for. In this
page you still can rerun diagnostic test at any
time.
115
Page 124 / 144
ADSL Router User Manual
Admin Account
This page allows you to type in the password for accessing into your DSL Router.
For the
Admin Account
, the default setting
for user password is
admin
. If you want to
change the username and the password,
please retype the new password in the
Confirm field for confirmation. Then click
Apply
.
Remote Access
There are four interfaces for the remote access. Please choose one of them if you want to enable the
remote access control.
Select the Internet Connection:
Select one connection item from the drop
down list to enable the function.
Web Browser:
Choose this box if you want to have remote
control through HTTP. The default port
number will be shown in the box. Modify
this number whenever you want.
Telnet:
Choose this box if you want to have remote
control through telnet.
FTP:
Choose this box if you want to have remote
control through FTP.
SNMP:
Choose this box if you want to have remote
control through SNMP agent.
TFTP:
Choose this box if you want to have remote
control through TFTP.
Secure Shell (SSH):
Choose this box if you want to have remote
control through SSH.
Ping:
Choose this box if you want to have remote
control through ping command under DOS
prompt.
116
Page 125 / 144
Chapter 5:Connection Mode
Interntet Time
The router’s clock must synchronize with global Internet’s time. The time you set in the screen will
be adapted to system log.
Update:
Click this button to refresh the current time.
Set Time by:
The default setting is Manual. If you select
Time Server, you don’t need to type in the
time setting manually. The system will set
automatically.
Time:
Set the start time by typing the year, the
month, the day, the hour, and the date to help
the router perform tasks.
Timezone:
Choose the time zone of your country where
you are going to use the router.
Apply:
Save the data on the screen and apply the
data after restarting the router.
System Log
As shown in the web page, you can view the
system log and configure system log
whenever you want.
Configure System Log
After you click
Configure System Log
, the
following screen will appear. You can enable
or disable the log function, choose log level,
display level and proper mode as you like.
Then click
Apply
.
117

Rate

3.5 / 5 based on 2 votes.

Popular Siemens Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top