Page 86 / 121
Scroll up to view Page 81 - 85
84
Configuring the local network
Network configuration with Windows 2000
To integrate a PC with Windows 2000 into a network that is configured with a Gigaset
SE361 WLAN, you must carry out the following steps:
1.
Install the network services (see below).
2.
Select a computer name and workgroup (see page 85).
3.
Install the TCP/IP protocol (see page 86).
4.
Make TCP/IP protocol settings (see page 88).
5.
Deactivate the http proxy (see page 90).
6.
Deactivate the popup blocker (only on Mozilla Firefox, see page 90)
7.
Synchronise the TCP/IP settings with the Gigaset SE361 WLAN (see page 91).
Installing network services
You must install the network services so that the PCs in your network can access shared
resources. This is done as follows:
ì
Click on
Start
–
Settings
–
Control Panel
.
ì
Double-click on the
Network and Dial-up Connections
icon.
ì
In the left-hand pane click on
Add Network Components
.
ì
Now select
Network Services
and click on
Next
.
You will now be prompted to insert the Windows installation CD.
Page 87 / 121
85
Configuring the local network
ì
Insert the WIN2000 CD and click on
OK
to install all the required components.
Selecting a computer name and workgroup
You now have to specify a name for the PC and define the workgroup to which it is to
be assigned.
ì
In the left-hand pane click on
Network Identification
and then on
Properties
.
ì
In the
Computer Name
field, enter the name the PC is to appear under in the net-
work. This name must be unique within the network.
ì
In the
Workgroup
field, enter a name for the workgroup. This name must be identi-
cal for all the PCs in the network.
ì
Confirm this with
OK
.
Page 88 / 121
86
Configuring the local network
Installing the TCP/IP protocol
The
TCP/IP
protocol ensures that the PCs in the network can communicate with each
other. You now have to install this
Protocol
.
ì
Right click to open the
LAN Connection
.
ì
In the next window click on
Properties
.
ì
Click on
Install
.
Page 89 / 121
87
Configuring the local network
ì
Select
Protocol
and click on
Add
.
ì
In the
Network Protocol
list, select
Internet Protocol (TCP/IP)
.
ì
Click on
OK
.
The TCP/IP protocol is now shown in the
LAN Connection Properties
window.
Page 90 / 121
88
Configuring the local network
TCP/IP settings
The TCP/IP protocol requires certain settings which you must now make or check so that
it can function smoothly.
19216811.live