Page 116 / 185 Scroll up to view Page 111 - 115
118
Call guide
Toggling telephone calls
Conference call between three participants
Key combination
Effect
Description
R
Phone number
Consultation
Press
R
to initiate a consultation with
another phone number during a call.
Dial the desired (internal or external)
number for the consultation.
R2
Accept call waiting/
toggle between two
calls
Press
R2
to accept an incoming call
during a call. The connection to the
first call is put on hold.
If you terminate the first call before-
hand, your phone rings and you can
take the second call as usual.
By pressing
R2
again, you can toggle
to the waiting caller.
R0
Reject call waiting
Press
R0
to reject an incoming call
during a call.
The second call is rejected automati-
cally after 120 seconds have elapsed.
R1
Terminate one call
and return to the
waiting call
Press
R1
to end the current call. You
then switch to the waiting call. The
second call is ended automatically
when you replace the receiver.
Key combination
Effect
Description
R3
Conference call
When you are making a call and a sec-
ond call is waiting (see above), press
R3
to enable a conference call
between you and the two call parties.
R2
End the conference
call and continue
calls separately
Press
R2
to end the conference call.
You are then connected to the previ-
ously active call again and the previ-
ous waiting call is now in the wait
state again.
Page 117 / 185
119
Call guide
R4
End conference call
and set up the con-
nection between call
parties
If you press
R4
during a conference
call, you end your call and set up a
connection between the other two
external call parties. You can then
replace the receiver. In the case of an
internal conference call, you simply
need to hang up.
End conference call
Replace the receiver to terminate all
calls.
Key combination
Effect
Description
Page 118 / 185
120
Administration
Administration
The Giga762SX WLAN dsl user interface includes several helpful functions for adminis-
tration.
Regional Options
Enables regional settings (page 121)
System Password
Changes the system password (page 122)
System Management
Configures system management (page 124)
Save & Restore
Backs up and, if necessary, restores configuration data
(page 126) or reset the Giga762SX WLAN dsl to the factory
settings (page 127)
Reboot
Reboots the device (page 127)
Firmware Update
Updates firmware (page 127)
System Log
Configures settings for the system log (page 128)
Page 119 / 185
121
Administration
Regional Options
For operating your Giga762SX WLAN dsl, you can select the location, time zone and for-
mat for entering the time and date, and you can also configure a time server for the
Internet time (system time).
ì
In the
Advanced Settings
menu, select:
Administration
Regional Options
ì
Select the country you are currently in from the list. You can set the time so that it
automatically switches to summer time or the
Time zone
, as required.
If you have already configured the basic settings, you can change these here.
ì
Select the required option or choose the
Time zone
for your location.
ì
Select the required format for entering the date and time from the
Date format
and
Time format
lists.
Page 120 / 185
122
Administration
Internet Time
The
System time
of the device is automatically synchronised with the time server on
the Internet. The time of the
Last synchronization with time server
is displayed for
your information.
ì
If you would like to use your own time server, activate the
On
option next to the
Use
custom time servers
field.
ì
Enter the Internet address of the time server in the
Preferred time server
or
Alter-
nate time server
fields.
ì
Click
OK
to apply the settings.
System Password
You can assign a System Password to the Giga762SX WLAN dsl user interface and spec-
ify the period after which a session is to be automatically ended if no further entry is
made.
ì
In the
Advanced Settings
menu, select:
Administration
System Password

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top