Page 106 / 185
Scroll up to view Page 101 - 105
108
Configuring Advanced Settings
ì
Click
On
to activate the
Quick Dial
option.
ì
Enter the quick dial number in the
Quick Dial
field and/or a name or combination of
letters in the
Vanity
field.
ì
Enter the phone number in the
Phone number / user name
field.
ì
Click
Add
to save the entry.
More empty lines will then be added.
ì
Click
OK
to confirm the settings.
USB
The USB port of your Giga762SX WLAN dsl can be used to set up a
File Server
to share a USB mass storage device (page 110)
Print Server
to share a printer (page 115)
Web Server
to provide a Web server (page 115)
Page 107 / 185
109
Configuring Advanced Settings
ì
Go to the
Advanced Settings
menu and select:
USB
ì
Select the
On
option for
USB
.
ì
Click
OK
to activate the USB port.
If a USB device is connected, its
Status
is displayed. If a USB mass storage device is con-
nected, the partitions are displayed.
ì
Click
Refresh
to display the current status.
Notes:
u
If you connect a USB hub to the USB port of the Giga762SX WLAN dsl, you can con-
nect and use a USB memory and a USB printer at the same time.
u
If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA.
u
The Giga762SX WLAN dsl supports USB V 2.0. Devices that support USB V 1.1 may
also be connected.
u
The following file system formats are supported: FAT, FAT32, VFAT
NTFS is not supported.
u
There should be not more than 1000 files stored in any directory of the USB mass
storage device.
Page 108 / 185
110
Configuring Advanced Settings
Safely Remove Hardware
ì
Click this button and wait until any connected USB storage device are fully deacti-
vated before disconnecting them from your device.
ì
Click
OK
to save the changes.
File Server
The devices integrated file server allows you to manage folders and files on a connected
USB mass storage device (for example a USB flash drive or external USB drive) and make
them available to all users in the local network and on the Internet.
Connect a USB data carrier to the Giga762SX WLAN dsl via the USB port.
ì
In the
Advanced Settings
menu, select:
USB
–
File Server
I
ì
Select the
On
option for the
File Server
.
ì
Enter the
Workgroup name
(
WORKGROUP
is the standard name for Windows) in
which the file server is located. If you now search your network you will find the file
server in the specified domain / workgroup in the network environment.
ì
You can enter a
Description
of the file server in the next field.
ì
Click
Add
to define
Users
who should have access to the File Server.
You have to define at least one use to define shares on the
File Server
.
Page 109 / 185
111
Configuring Advanced Settings
ì
Enter a
User name
, a
Password
, and confirm it in the next line.
ì
Click
OK
.
The
File Server
start page is shown again.
ì
Click
Add
to define
Shared Folders
for the
Users
defined above.
ì
Enter a name for the new file share.
ì
Choose the directory for the share via the
Browse
button.
ì
Enter a comment in the next line.
ì
Click
OK
.
Now the users you have defined are displayed.
Page 110 / 185
112
Configuring Advanced Settings
ì
Choose the
Access Rights
for each user:
no access
,
read-write access
, or
read-
only access
.
ì
Click
OK
.
The
File Server
start page is shown again.
ì
You can edit or delete a user by clicking the
Edit
or
Delete
button.
ì
You can edit or delete a file share by clicking the
Edit
or
Delete
button.
ì
Click
OK
to save your settings.
Web Server
Your devices integrated Web server allows you to publish data stored on a connected
USB mass storage device (for example a USB flash drive or external USB drive) on the
Internet.
Internet users can access your Web server by entering the public IP address in their Inter-
net browser. As Internet providers often change this each time someone dials in, it is
also worth using dynamic DNS (see page 79).