Page 26 / 185 Scroll up to view Page 21 - 25
28
First steps
Using an external modem
ì
Connect the
LAN4/WAN
port on the Giga762SX WLAN dsl with an external modem.
To do this, use the cable supplied (
black
).
ì
Then connect this modem to the relevant communications port (e.g. splitter).
Modem
Cable (black)
Page 27 / 185
29
First steps
Connecting to the analogue phone port
To make conventional calls via the fixed network, you must connect your Giga762SX
WLAN dsl with the phone port of the splitter.
ì
Connect the Giga762SX WLAN dsl with the splitter as follows:
Insert one plug of the telephone cable supplied (
green
) into the
Line
port
(
green
) on the Giga762SX WLAN dsl.
Plug the other connector on the telephone cable into the phone socket on the
splitter.
Splitter
Telephone cable
Page 28 / 185
30
First steps
Connecting to the phone
ì
Connect the Giga762SX WLAN dsl with the analogue phone as follows:
Insert the plug of the telephone into the
Phone 1
or
Phone 2
port on the
Giga762SX WLAN dsl.
Note:
In the event of power failure you cannot make a VoIP call. In this case all outgoing calls
are directed to the PSTN line via the analog line.
Page 29 / 185
31
First steps
Connecting wired to the PC
You can connect wired or wireless PCs to your Giga762SX WLAN dsl to create a local area
network (LAN). Wireless connection is possible after connecting the Giga762SX WLAN
dsl to the power supply (see page 32).
First connect just
one
PC to the Giga762SX WLAN dsl, wired connection is recom-
mended. You can then carry out the general configuration. (If you wish to connect more
PCs, please turn to page 36.)
ì
Connect one of the LAN ports (
LAN1
LAN4
,
yellow
) on the Giga762SX WLAN dsl
to the Ethernet network card in your PC. To do this, use the LAN cable supplied
(CAT5,
yellow
).
LAN cable (yellow)
Page 30 / 185
32
First steps
Connecting to the mains power supply
ì
Connect the mains adapter cable to the
PWR
socket on the Giga762SX WLAN dsl.
ì
Plug the mains adapter into a mains socket.
ì
If your device has an on/off button, switch on the device.
The Giga762SX WLAN dsl is now switched on and ready for operation.
Please remember:
Only use the mains adapter supplied with the device (12V 1.5A DC).

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top