Page 46 / 185
Scroll up to view Page 41 - 45
48
Basic Setup Wizard
ì
Select
Other
from the
Service provider
selection menu (default setting) or, if
required, use one of the suggested providers from the list. Enter the data you have
received from your service provider:
User name
,
Displayed name
,
Authorization user name
,
Password
,
SIP domain
,
SIP realm
,
Proxy server address
and
Registrar server address
.
ì
Leave the default settings for the parameters
SIP listen port
,
Proxy server port
,
Registrar server port
,
Voice codecs
and
Out-of-band DTMF
, unless your service
provider has provided you with other data.
ì
If you wish to delete the entered data, click the
Clear
button.
ì
Confirm your selection with
Next >
.
WPS Registration
Wi-Fi Protected Setup (WPS) makes it easier to establish a wireless network. Devices
equipped with WPS can create and synchronise an SSID and a WPA key (pre-shared key)
automatically. These security data can be created in different ways:
–
They are generated automatically on initial WPS registration.
–
They have been previously configured manually.
–
The device has been delivered with preset security data.
All you need to do to establish a secure wireless connection is
u
for devices with hardware button – to press the registration (or Scan) button on the
access point and on the client or
u
for devices without hardware button – to activate the WPS registration in the user
interface of the access point and the client.
For further information, see "WPS" on page 15.
Page 47 / 185
49
Basic Setup Wizard
ì
Click
Register
to start WPS registration.
This function corresponds to pressing the
Scan
button on the device’s back panel.
Once WPS registration is activated, the device searches for a WPS client within range.
Any WPS client within range that activates the WPS function during the two-minute
interval receives the Giga762SX WLAN dsl security data (SSID and pre-shared key)
and is thereby registered.
The registration progress is shown in the window.
You can repeat these steps for each WLAN client to be registered.
Only one client may register during the two-minute interval. If two clients try to reg-
sister at the same time, the registration will be broken down and an error message
appears.
ì
To go to the next step, click
Next >
Page 48 / 185
50
Security Setup Wizard
Summary
The basic settings you have made through the wizard are shown in the next step for you
to check.
ì
If you want to change the settings, click
< Back
.
ì
If you want to confirm the settings, click
Finish
to close the Basic Setup Wizard.
The Giga762SX WLAN dsl is now configured and ready to connect to the Internet. The
Security Setup Wizard
then opens automatically. We strongly recommend using the
Security Setup Wizard to protect your Giga762SX WLAN dsl against attacks. If you want
to carry this out at a later stage, deactivate
I would like to run the Security Setup Wiz-
ard now.
Security Setup Wizard
The
Security Setup Wizard
offers you additional settings for improving your network
security. You can:
u
Assign a password for configuring the Giga762SX WLAN dsl (page 52),
u
Change the SSID for your wireless network (page 53),
u
Set up the
Encryption
for the wireless network (page 54),
u
Limit access to the wireless network to certain PCs (page 58).
The user interface of the Giga762SX WLAN dsl guides you step by step through the secu-
rity configuration. Once you have completed a screen, click
Next >
. If you want to make
any changes or check your entries again, click
< Back
.
Page 49 / 185
51
Security Setup Wizard
ì
Select the
Security Setup Wizard
option on the start screen or on the tab to start
the security configuration if you did not make the security settings immediately after
setting up the basic settings.
ì
Click
Next >
.
When using WPS please note the following:
Your Giga762SX WLAN dsl is equipped with
WPS
(Wi-Fi Protected Setup). You can use
it to set the security of your wireless network easily with one click only (see page 15).
If no manual configuration of security data has been performed before, with the WPS
registration the preset SSID and pre-shared key (WPA2-PSK/WPA-PSK) are used.
You can inspect the SSID used in the
Security Setup Wizard
(see page 53) or in the
Advanced Settings
(see page 85), the pre-shared key you will find only it in the
Advanced Settings
menu (see page 89).
Page 50 / 185
52
Security Setup Wizard
Assigning a password
In the first step of the configuration you can change the password for the user interface.
When the device is supplied, the configuration of your Giga762SX WLAN dsl is protected
with the
admin
password. To prevent unauthorised changes to the configuration, you
should change the password at regular intervals.
ì
Enter the old password in the
Current password
field.
ì
Enter the new password in the
New password
field and repeat the entry in the
Confirm new password
field.
The password may contain up to 20 characters. Note case sensitivity. Avoid proper
names and all too obvious words. Use a combination of letters, digits and special
characters.
ì
To go to the next step, click
Next >
Note:
If you ever forget your password you will have to return the Giga762SX WLAN dsl to
its factory settings (page 127). Please bear in mind that this will restore
all
settings to
the factory configuration. The password will again be
admin
.
19216811.live