Page 56 / 185 Scroll up to view Page 51 - 55
58
Security Setup Wizard
Access control within the wireless network
In this step you can specify which PCs will have wireless access to the Giga762SX WLAN
dsl and hence to the LAN. Access control is based on the
MAC address
of the PC network
adapters. You can enter the MAC addresses for the PCs manually or select these from the
list of PCs that are currently logged in.
Access control is disabled by default. This means that all PCs that use the correct
SSID
can be logged in.
ì
Next to the
MAC address filter
, select
On
to activate the MAC filter.
Entering MAC addresses manually
ì
Enter the MAC address of the network adapter. You will find this address on the
underside of the device.
ì
Enter the name of the PC.
ì
Click the
Add
button to add the entry to the list.
Selecting from the list of logged-in PCs
ì
Select the required PC from the
Known wireless clients
list. All PCs that were
already entered manually on the router with the MAC address are displayed.
ì
Click the
Add
button to add the selected PC to the list.
Page 57 / 185
59
Security Setup Wizard
ì
To go to the next step, click
Next >
Saving settings
On the next screen you end the wizard and save the settings. You will be informed of
any security risks that still exist.
ì
Click
Finish
to end the wizard.
The settings will now be activated on the Giga762SX WLAN dsl.
Note:
If you activate MAC access control, you must at least add the PC on which you are con-
figuring the Giga762SX WLAN dsl to the list. Otherwise, you will have no access to the
user interface and will receive an appropriate error message.
WPS registration is only possible for PCs in the list if you have activated MAC access
control.
If you have inadvertently denied all PCs access to the Giga762SX WLAN dsl, you have
two options:
u
You can completely reset the Giga762SX WLAN dsl (page 26).
u
You can connect a PC to the Giga762SX WLAN dsl using one of the LAN connec-
tions (by cable). As MAC access control only affects PCs that are connected wire-
lessly, you can use this PC to change the configuration.
Page 58 / 185
60
Configuring Advanced Settings
Configuring Advanced Settings
In the
Advanced Settings
menu, you can configure all the options for the Giga762SX
WLAN dsl. If required, you can also change the settings you made using the wizard. The
following table contains the options available in this menu.
Note:
If you have changes the encyption setting, you must now configure the WEP or WPA
key for the wireless network adapter of the PC that has been configured with other
values. After this you can again wirelessly log on to the Giga762SX WLAN dsl.
Menu
Description
Internet
This menu comprises all the setting options relating to the
Internet. In particular, you can do the following:
u
Check and change the configuration for Internet access
(page 64) or specify a preferred DNS server (page 67),
u
Configure the firewall, i.e. a number of security and special
functions, for example access control from local PCs to the
Internet (page 69),
u
Make the NAT settings required to provide your own serv-
ices on the Internet (page 73),
u
Set up dynamic DNS for a fixed Internet address on the
device (page 79),
u
Set up routing for your Internet connection services
(page 81).
Local Network
You can change the
Private IP address
of the Giga762SX WLAN
dsl here and make settings on the DHCP server (page 82).
Wireless Network
You can configure the options for wireless communication
(SSID and encryption) here and restrict access to the Giga762SX
WLAN dsl (page 85).
Telephony
You can make the settings for Internet telephony (VoIP) here
and configure your extensions (page 98).
USB
You can make the settings here for operating an external data
carrier, a Web server, a file server or a print server on the USB
port (page 108).
Administration
You can make or change various system settings here, for
example change the password (page 122), set the time
(page 121) or activate remote management (page 124).
In addition, you can also back up the data on the Giga762SX
WLAN dsl or configure firmware update (page 126).
Page 59 / 185
61
Configuring Advanced Settings
Internet
If you have configured the Giga762SX WLAN dsl using the two wizards, you have also
configured the
WAN
connection (Internet access). You can check or change these set-
tings in the
Internet
menu.
This menu also offers you a wide range of possibilities for setting up security settings
and limiting access to the Internet as well as for providing your own services on the
Internet.
You can carry out the following via the
Internet
menu:
Internet
Activate/deactivate the Internet connection and edit the
virtual connection parameters (for further information see
below),
Internet Connection
Check and edit the Internet connection of the Giga762SX
WLAN dsl (for further information see below),
DNS Servers
Make DNS server settings (page 67),
MAC Address
Enter the PC's registered MAC address for Internet access
(WAN interface, see page 68),
Firewall
Protect the network against unauthorised external access
(see page 69),
Address Translation
(NAT)
Provide your own services on the Internet (NAT, see
page 73),
Dynamic DNS
Set up dynamic DNS (page 79),
Routing
Set up routing for your Internet connection services
(page 81).
Page 60 / 185
62
Configuring Advanced Settings
Internet selection
You can activate or deactivate the Internet connection for the Giga762SX WLAN dsl on
this screen. You can choose the connection type and set up and edit a number of con-
nection services.
ì
In the
Advanced Settings
menu, select:
Internet
ì
Select the appropriate option to activate or deactivate the Internet function of the
Giga762SX WLAN dsl.
ì
Choose the desired
Connection type
for your Internet connection:
Choose the
ADSL
if you are using the integrated ADSL modem of the Giga762SX
WLAN dsl.
Choose
Ethernet
if you are setting up the connection to the Internet via an Eth-
ernet network connection (e.g. if you are using an external modem with an Eth-
ernet connection).
If you change the connection type, you must also modify your Internet access set-
tings accordingly (page 64).
Configure multiple connection services
Your Internet service provider can permit you to set up a number of
Connection serv-
ices
. You can set up these services here. You can configure rules for using these services
under the
Routing
option (page 81).
ì
Select the appropriate option to activate or deactivate
Configure multiple connec-
tion services
.
If you have already configured an Internet connection (e.g. in the Basic Setup Wizard),
this is shown as
Connection service selected to edit
. This is then also displayed on
other pages of the
Internet
menu.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top