19216811.live163
Appendix
Giga762SX WLAN dsl functions and their interdependency
The following table shows which functions of your device are possible in which
combination. In the case of error, check that the following conditions are fulfilled:
Deactivating HTTP proxy and configuring a pop-up blocker
Before you can start the configuration program of the Giga762SX WLAN dsl, you might
need to adjust the settings described below for your Web browser.
Deactivating the HTTP proxy
Make sure that the
HTTP proxy
in your web browser is deactivated. This function must
be deactivated so that your web browser can access your Giga762SX WLAN dsl's
configuration pages.
The following section describes the procedure for Internet Explorer
and Mozilla Firefox. First decide which browser you whish to use, and
then follow the appropriate steps.
u
Internet Explorer
ì
Open Internet Explorer and from the
Tools
menu, select
Internet
Options
.
Function
Possible in combination with
Not possible in combina-
tion with
WPS
WPA2-PSK/WPA-PSK
encryption
no encryption
WPA2/WPA authentication
WEP encryption
WDS
WEP encryption
no encryption
WPA2-PSK/WPA-PSK or WPA2/
WPA authentication
Operating information:
u
USB port
If connecting a device without its own power supply directly to the USB port,
please note that the power consumption must not exceed 500 mA. If this value is
exceeded, you will have to use a separate power supply unit for your USB device
or connect a USB hub with a separate power supply. A USB hard drive and a USB
printer can be operated simultaneously on a USB hub.
u
LAN ports
The LAN ports may only be used for in-house networks. The ports are destroyed
externally if there is a power surge.
u
Telephone ports
The phone ports are only suitable for connecting in-house phones/phone systems.
The ports are destroyed externally if there is a power surge.