Page 106 / 202
Scroll up to view Page 101 - 105
5 - Information / Configuration
Page 5-70
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Add
•
Click on the
Add
button to display the following screen:
Field
Action
Destination Network
Address
Enter the IP address of the remote network.
Subnet Mask
Enter the remote subnet mask.
Use Interface
Select the interface you want to use from the scroll down list
(pppoa_0_8_35 for example).
Page 107 / 202
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-71
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.7.9.3
Policy Routing
Object:
This menu is used to add policy routings.
•
In the
Advanced Setup
menu, select
Routing
then select
Policy Routing
.
The following screen opens:
Field
Meaning
Policy Name
Policy name
Source IP
Source IP address
LAN Port
Nature of the LAN port
WAN
Interface used
Default GW
Default gateway
Page 108 / 202
5 - Information / Configuration
Page 5-72
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Add
•
Click on the
Add
button to display the following screen:
Field
Action
Policy Name
Enter the policy name.
Physical LAN Port
Select Blank or the interface of your choice (ENET(1-4) or
wlan0) from the scroll down list.
Source IP
Enter a “Source” IP address
Use Interface
Select the interface you want to use from the scroll down
list (pppoa_0_8_35 for example).
Default Gateway
Enter the default gateway IP address.
Page 109 / 202
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-73
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.7.9.4
RIP
Object:
The "RIP" protocol (
R
outing
I
nformation
P
rotocol) lets you tell routers the distance
(number of hops) which separates them.
This protocol only takes account of the distance between two machines in terms of
hops.
•
In the
Advanced Setup
menu, select
Routing
then select
RIP
.
The following screen opens:
Field
Action/Meaning
Default value
Interface
Created or native interface.
Version
Select the RIP version of your choice from the
scroll down list.
•
1
: for RIP1
•
2
: for RIP2
•
Both
2
Operation
Select the operation in the scroll down list:
•
Active
: to transmit the routing information
to the other routers and receive it from them
•
Passive
: to listen to the
RIP
broadcasts
and update its routing table, but not indicate
its own routes (silent mode)
Passive
Enabled
Check the box to activate the "RIP" function on
the corresponding interface.
Not checked
Page 110 / 202
5 - Information / Configuration
Page 5-74
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.7.9.5
IPv6 Static Route
Object:
This menu is used to add a static route.
•
In the
Advanced Setup
menu, select
Routing
then select
IPv6 Static Route
.
The following screen opens:
Field
Meaning
Destination
Remote network IPv6 address
Prefix Length
Prefix length
Gateway
IPv6 gateway of the remote network
Interface
Remote network interface
19216811.live