1. Home
    2. /
  2. Manuals
    3. /
  3. Sagem
    4. /
  4. Fast 1704
    5. /
  5. 21
Page 101 / 202 Scroll up to view Page 96 - 100
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-65
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Field
State
Class Name
Traffic Class Name.
Order
Sequence number.
Classification Criteria
Class Intf
Ether Type
Nature of the LAN port.
SrcMAC/Mask
"Source" MAC address (your computer, for example) and
associated subnet mask.
DstMAC/Mask
"Destination" MAC address (a machine on the Internet, for
example) and associated subnet mask.
SrcIP/Mask
"Source" address (your computer, for example) and
associated subnet mask.
DstIP/Mask
"Destination" address (a machine on the Internet, for
example) and associated subnet mask.
Proto
Protocol used.
Src Port
"Source" port.
Dst Port
"Destination" port.
DSCP Check
Differentiated Services Code Point, priority value from Default
to CS7.
802.1P Check
Priority field 802.1P (value between 0 and 7).
Classification Results
Queue Key
Queue number, allocated by the system according to the
selected precedence.
DSCP Mark
DSCP priority (from Default to CS7).
802.1P Mark
Priority field 802.1P (value between 0 and 7).
VlanID Tag
Enable
QoS enabled or disabled for this traffic class.
Note:
This status can be amended starting from this
window.
Page 102 / 202
5 - Information / Configuration
Page 5-66
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Add
•
Click on the
Add
button to display the following screen:
Page 103 / 202
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-67
Sagem Communications SAS
document. Reproduction and disclosure prohibited
Field
Action
Traffic Class Name
Enter a name for the traffic class you want to create.
Rule Order
Select from the scroll down list:
•
Blank
•
Last
•
Number
: Number allotted by the system to the
existing rules
Rule Status
Select from the scroll down list:
•
Disable
: QoS disabled for this static class rule
•
Enable
: QoS enabled for this static class rule
Class Interface
Select from the scroll down list:
•
Local
•
eth0
•
wl0
Ether Type
Select from the scroll down list:
•
IP
•
ARP
•
IPv6
•
PPPoE_DISC
•
PPPoE_SES
•
8865
•
8866
•
8021Q
Source MAC Address
Enter a "Source" MAC address.
Source MAC Mask
Enter a "Source" MAC mask.
Destination MAC Address
Enter a "Destination" MAC address.
Destination MAC Mask
Enter a "Destination" MAC mask.
Assign Classification Queue
Select from the scroll down list:
•
Blank
•
Number:
Priority number and associated queue
number, defined by the system starting from the
“Queue Precedence” (see subsection 5.7.8.1).
Mark Differentiated Service Code
Point (DSCP)
Select the type of Differentiated Services Code
Point (DSCP) mark to be allocated (6-bit coding)
from the scroll down list.
Default to CS7: 000000 to 111000
Mark 802.1p priority
Select Blank or a priority value between 0 and 7
from the scroll down list.
Tag VLAN ID
Enter a value from 0 to 4094.
Page 104 / 202
5 - Information / Configuration
Page 5-68
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.7.9
Routing
This menu contains 3 sub-menus:
•
Default Gateway (see subsection 5.7.9.1)
•
Static Route (see subsection 5.7.9.2)
•
Policy Routing (see subsection 5.7.9.3)
•
RIP (see subsection 5.7.9.4)
•
IPv6 Static Route (see subsection 5.7.9.5)
5.7.9.1
Default Gateway
Object:
This menu is used either to allocate dynamically a default gateway address to the
router from a PVC or to enter an address or choose an interface.
•
In the
Advanced Setup
menu, select
Routing
then select
Default Gateway
.
The following screen opens:
Field
Action
Select a preferred wan
interface as the system
default gateway
Select the interface you want to use from the scroll down list
(pppoa_0_8_35 for example).
Select a preferred wan
interface as the system
default IPv6 gateway
Select the interface you want to use from the scroll down.
Page 105 / 202
5 - Information / Configuration
SAGEM F@st™ 1704 Reference Manual - 253272861-A
Page 5-69
Sagem Communications SAS
document. Reproduction and disclosure prohibited
5.7.9.2
Static Route
Object:
This menu is used to add a static route.
•
In the
Advanced Setup
menu, select
Routing
then select
Static Route
.
The following screen opens:
Field
Meaning
Destination
Remote network IP address
Subnet Mask
Remote subnet mask
Gateway
Default gateway of the remote network
Interface
Remote network interface

Rate

4 / 5 based on 2 votes.

Popular Sagem Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top