Page 31 / 127
Scroll up to view Page 26 - 30
300M Wireless N Router
RNX-N300RT
User Manual
4.4 WPS Setup
This section will guide you to add a new wireless device to an existing network quickly by
using the
WPS
(Wifi Protect Setup)
function.
a)
Choose menu “
WPS
”, you will see the next screen (shown in Figure 4-3 ).
Figure 4-3
WPS
¾
WPS Status -
Enable or disable the WPS function here.
¾
Current PIN -
The current value of the Router's PIN is displayed here. The default
PIN of the Router can be found in the label or User Guide.
¾
Restore PIN -
Restore the PIN of the Router to its default.
¾
Gen New PIN -
Click this button, and then you can get a new random value for the
Router's PIN. You can ensure the network security by generating a new PIN.
-30-
Page 32 / 127
300M Wireless N Router
RNX-N300RT
User Manual
¾
Add device -
You can add a new device to the existing network manually by clicking
this button.
b)
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a
wireless connection between wireless adapter and Router using either Push Button
Configuration (PBC) method or PIN method.
)
Note:
To build a successful connection by WPS, you should also do the corresponding
configuration of the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company
for example.
4.4.1 By Push Button Configuration (PBC)
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration
(PBC) method, you can add it to the network by PBC with the following two methods.
Method One:
Step 1:
Press the WPS button on the front panel of the Router.
Step 2:
Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3:
Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
-31-
Page 33 / 127
300M Wireless N Router
RNX-N300RT
User Manual
The WPS Configuration Screen of Wireless Adapter
Method Two:
Step 1: Press the WPS button on the front panel of the Router.
Step 2: For the configuration of the wireless adapter, please choose “
Push the button
on my access point
”
in the
configuration utility of the WPS as below, and click
Next
.
-32-
Page 34 / 127
300M Wireless N Router
RNX-N300RT
User Manual
The WPS Configuration Screen of Wireless Adapter
Step 3: Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
-33-
Page 35 / 127
300M Wireless N Router
RNX-N300RT
User Manual
Method Three:
Step 1:
Keep the default WPS Status as
Enabled
and click the
Add device
button in
Figure 4-3, then the following screen will appear.
Figure 4-4
Add A New Device
Step 2:
Choose “
Press the button of the new device in two minutes
” and click
Connect
.
Step 3:
For the configuration of the wireless adapter, please choose “
Push the button
on my access point
” in the configuration utility of the WPS as below, and click
Next
.
The WPS Configuration Screen of Wireless Adapter
-34-
19216811.live