Rosewill RNX-N300RT Router Manual PDF (Setup & Configuration Guide)

Page 46 / 127 Scroll up to view Page 41 - 45

300M Wireless N Router

RNX-N300RT

User Manual

4.

If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select

BigPond Cable

. And you should enter the following parameters (Figure 4-11):

Figure 4-11 WAN

¾

User Name/Password -

Enter the User Name and Password provided by your ISP.

These fields are case-sensitive.

¾

Auth Server -

Enter the authenticating server IP address or host name.

¾

Auth Domain -

Type in the domain suffix server name based on your location.

e.g.

NSW / ACT -

nsw.bigpond.net.au

VIC / TAS / WA / SA / NT -

vic.bigpond.net.au

QLD -

qld.bigpond.net.au

¾

MTU Size -

The normal

MTU

(Maximum Transmission Unit) value for most Ethernet

networks is 1500 Bytes. It is not recommended that you change the default

MTU Size

unless required by your ISP.

-45-

Page 47 / 127

300M Wireless N Router

RNX-N300RT

User Manual

¾

Connect on Demand -

In this mode, the Internet connection can be terminated

automatically after a specified inactivity period (

Max Idle Time

) and

be

re-established

when you attempt to access the Internet again.

If you want your Internet connection

keeps active all the time, please enter “0” in the

Max Idle Time

field. Otherwise, enter

the number of minutes you want to have elapsed before your Internet access

disconnects.

¾

Connect Automatically -

The connection can be re-established automatically when

it was down.

¾

Connect

Manually

-

You

can

click

the

Connect

/

Disconnect

button

to

connect/disconnect immediately.

This mode also supports the

Max Idle Time

function

as

Connect on Demand

mode. The Internet connection can be disconnected

automatically after a specified inactivity period and

re-established when you attempt

to access the Internet again.

Click the

Connect

button to connect immediately. Click the

Disconnect

button to

disconnect immediately.

)

Note:

Sometimes the connection cannot be terminated although you specify a time to Max

Idle Time because some applications are visiting the Internet continually in the

background.

Click the

Save

button to save your settings.

5.

If your ISP provides L2TP connection, please select

L2TP

option. And you should

enter the following parameters (Figure 4-12):

-46-

Page 48 / 127

300M Wireless N Router

RNX-N300RT

User Manual

Figure 4-12 WAN

¾

User Name/Password -

Enter the User Name and Password provided by your ISP.

These fields are case-sensitive.

¾

Dynamic IP/ Static IP -

Choose either as you are given by your ISP. Click the

Connect

button to connect immediately. Click the

Disconnect

button to disconnect

immediately.

¾

Connect on Demand -

You can configure the Router to disconnect from your Internet

connection after a specified period of inactivity (

Max Idle Time

). If your Internet

connection has been terminated due to inactivity,

Connect on Demand

enables the

Router to automatically re-establish your connection as soon as you attempt to

-47-

Page 49 / 127

300M Wireless N Router

RNX-N300RT

User Manual

access the Internet again. If you wish to activate

Connect on Demand

, check the

radio button. If you want your Internet connection to remain active at all times, enter 0

in the

Max Idle Time

field. Otherwise, enter the number of minutes you want to have

elapsed before your Internet connection terminates.

¾

Connect Automatically -

Connect automatically after the Router is disconnected. To

use this option, check the radio button.

¾

Connect Manually -

You can configure the Router to make it connect or disconnect

manually. After a specified period of inactivity (

Max Idle Time

), the Router will

disconnect from your Internet connection, and you will not be able to re-establish your

connection automatically as soon as you attempt to access the Internet again. To use

this option, check the radio button. If you want your Internet connection to remain

active at all times, enter "0" in the

Max Idle Time

field. Otherwise, enter the number

of minutes that you wish to have the Internet connecting last unless a new link is

requested.

)

Note:

Sometimes the connection cannot be terminated although you specify a time to Max

Idle Time because some applications are visiting the Internet continually in the

background.

Click the

Save

button to save your settings.

6.

If your ISP provides PPTP connection, please select

PPTP

option. And you should

enter the following parameters (Figure 4-13):

-48-

Page 50 / 127

300M Wireless N Router

RNX-N300RT

User Manual

Figure 4-13

PPTP Settings

¾

User Name/Password -

Enter the User Name and Password provided by your ISP.

These fields are case-sensitive.

¾

Dynamic IP/ Static IP -

Choose either as you are given by your ISP and enter the

ISP’s IP address or the domain name.

If you choose static IP and enter the domain name, you should also enter the DNS

assigned by your ISP. And click the

Save

button.

Click the

Connect

button to connect immediately. Click the

Disconnect

button to

disconnect immediately.

-49-

Rate

Popular Rosewill Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share